Recent content by Sbarb

Hi, How do you get the kitchen panel type thing off an Integrated Dishwasher (the kitchen door that fits on the front) Are they normally screwed on or stuck on, any advice? once it's off can it be re used on another dishwasher? Thanks in advance cheers Simon

do you mean where the hot out let is now?

Yes, the cylinder is in the loft and on it's side with 2 large header tanks above. The cylinder has nothing connected on the usaul domed top part, it has the The Hot coming out side as shown on the pic. I'm fitting a salamander whole house pump to increase the pressure and flow for the...

Hi, I've been reading some posts on here about fitting an essex flange and I need to fit one for a house/shower salamander pump but the cylinder is fitted on it's side in the loft. So do I try and fit an S flange in the HW/ vent 22mm pipe out of the cylinder or do I cut another hole and...

Thanks poeple once again for ya advice and thanks chris for the link....!!!! :lol:

Thanks Chris, What sort of depth is okay, as I have notched for Copper 15/22mm pipe before. My other thought is a saniflo pump (sanivite) which can discharge 32/22mm pipe, then could it be put through the joists? any thoughts chris? Cheers Simon :(

Thanks Chris, What sort of depth is okay, as I have notched for Copper 15/22mm pipe before. My other thought is a saniflo pump (sanivite) which can discharge 32/22mm pipe, then could it be put through the joists? any thoughts chris? Cheers Simon :(

Hi There, I need to move my washing machine, and it's location will be on opposite side to the internal stack ( distance 2.2 meters). The room is on the first floor and I need to run the 40mm waste pipe under floor level but the joists run across the room. My question is - will building...

Hopefully picking the shower up tomorrow and the electrian coming the next day so I'll connect the water supply ready for him. I'll post back on it's performance for you! Cheers Simon

Thanks for your replies, . I think I will go with the Triton T80xr 9.5kw to keep the same output. Your right the price isn't that much difference. what is the pressure like out of the head? Thanks for your replies, I now know the difference. Cheers Simon

I have a 9.5kw shower currnetly so I just wondered if I chose the 8.5kw which is cheaper what difference would I notice in heat or pressure? The electrician said the the cable is okay for either? thanks for your reply though Cheers Simon

Hi, Just a quick question, I want to replace my electric shower but I just wanted to know what would the difference be from a 8.5 kw or 9.5 or higher. Does it produce more heat? Is the pressure out put increased the higher wattage you go? Any info greatfully recieved Thanks in...

Thanks for the info. Chris. Do I need to ask the local council or will the water board be able to help? Or could I lift the man hole cover that is in the middle of the drive way and put some water down the gully and see if it goes through the man hole? cheers simon

Can anyone advise regards regs etc. on the following senario - There is an out building behind my mates shop and we want to put a kitchen sink and unit in there for us to wash our hands and cups etc. There is a cold feed for the taps and wall heater, my question is regards the waste water...

Hi chris, Thanks for you help, does the screwfix fixing kit have a way to screw them onto the wall or is it a silicone seal to the tiling that holds it in place. As I see that the toolstation one has screw holes to mount it to the tiles/wall. Thanks Simon