Recent content by siddaway

  1. S

    Cracks after wood burner fitted

    Hi, the woodburner installer cut out a section of plasterboard and replaced it (im guessing with heat resistant plasterboard) behind the woodburner, the problem I have is even after filling, sanding and painting the join between the new section of plasterboard and old the heat makes the board...
  2. S

    Tile Edge Collapsing!

    never heard of support tray but it looks useful so in summary it looks as though I have to: - support the mortar with a cement fibre board - possibly fit felt support tray? - re point the tile ends - fit eaves comb
  3. S

    Tile Edge Collapsing!

    it is expanding foam, I think the main tile void was filled with foam and then the end of the tile had pointing the only thing though sitting below the pointing is a membrance, should there be nothing else supporting the pointing? also Im not sure wether the roof itself is too flat and its...
  4. S

    Architrave Repair

    thanks for all replies, I will give it a go at the weekend!
  5. S

    Plastering around oak lintel (fireplace)

    its a recent install so I suppose a good bit of movement should be expected? I will try what you suggest and fill a gap with flexible sealant cheers
  6. S

    Plastering around oak lintel (fireplace)

    the plaster behind the stove itself seems to be cracking now I have used it a bit but the cracks above the lintel seem to have been from the expansion/contraction of the beam is it likely to still have much movement in it or was the excessive movement just due to the wood drying?? and...
  7. S

    Architrave Repair

    would it be best to cut a wood section to fill the large void and then use the filler to fill the gaps?
  8. S

    Tile Edge Collapsing!

    I have recently moved into a house which has had a garden room extension added, I have just recently noticed that the roof tile edging is breaking down and falling into the gutter can anyone advise if this has been build wrong and how I can put it right??
  9. S

    Architrave Repair

    Hi After removing a strangely located light socket I now have a gaping hole in the door architrave (see pics below) any suggestions on how I can repair this? Can I fill it in somehow or will I have to repplace the whole sections of architrave?
  10. Untitled

    Untitled

  11. Untitled

    Untitled

  12. Untitled

    Untitled

  13. Untitled

    Untitled

  14. Untitled

    Untitled

  15. Untitled

    Untitled

Back
Top