Recent content by Steven Hamilton

Yes Sparky it was more of a question, whether smaller conduit is available that could be used by changing the gland already in the dm8 base ?

I followed the advice from Sparky and have purchased the DM8 base, so much smaller and neater, thank you for that. A shame it has such a large stuffing gland on the side I'm now looking how to reduce its size as I want to 6/8mm 10mm max size conduit....any advice. Thank you for your explanation

I have a number of these that I'm going to install around my house, I really don't like the Hikvision base Ds 1280 zj-s due to its overall size. Any advice please for any alternatives on cable entry/exit. I was wondering if I could drill the base & use a stuffing gland into 6mm flexi conduit to...

Thanks all, ordered a Hikvision POE switch now should be here in a few days.

Thank you very much for your help, I'll order one straight away... any recommendations on makes, be back for some more help I'm sure when it arrives lol.

OK Accelerator it's a TP link TL SG108E Gigabit switch ?

Hi guys, it's POE but when connected nothing power's up...

Hi, I'm having a problem installing the Hikvision Doorbell Camera DS KIS 603-P. I have run cat 5 outside to the Bell & to the monitor. Made it off with RJ 45's, carried out out a cable test which was fine. Plugged in the Hikvision bell & Monitor & then into my TP Link 8 way switch which is...

I do indeed a gent

Great thanks

Hi all, Help with a small issue please alarm working all fine since install, today I tried to arm it from the app on my phone & it shows the following message, " Alarm state cannot be changed please check at the panel " ? I'm lost...??

OK secureiam thank you I'll try that when I fixed the keypad

Morning, the bell and aux Tamper were like like I haven't done that (I have wireless Bell box) are the links that are there ok then.....I'll leave them. I'll link out the Tamper disabled & leave on the commissioning jumper. Smartcom is now connected to my home WiFi I'm assuming as it shows the...

Here is a picture Handymanjo

OK Handymanjo I'll take a picture and send it, by linking out, you mean use the jumpers. I thought when starting up the panel & holding down the default button that cleared the old memory? Thank you