Recent content by teeee91

Is it OK to use a 20A with 6mm cable?

Thanks for your reply, I currently have 3 separate cables out of the junction box going to a double socket each with a 3amp fused spur from one of them for a cooker hood is this OK?

Cheers mate

Hi all just got a new cooker hood I already have a fused spur with a 3amp fuse fitted and coming out of that I have 2.5 t&e, the hood had a plug which I have cut and it only has a live and netural. So is 2.5 t&e overkill going to the hood and do I just need to terminate the earth in the...

Thanks for your help, just picked up a fused switch

So just need too pick up a 13 amp fused spur to fit before the socket?

Sorry for all the questions dose it make any difference if its on a rcbo than a mcb So should look like this

There has always been 2 there the second runs the fridge freezer, I have added a fused spur from the first socket on the right for a cooker hood. Dose the second socked need to be fused?

Would it be OK to take a 3rd cable out of the first junction box like this? There is a hole for a third wire just a bit fiddly to get to

Hi everyone, would it be OK to add a second junction box strait from the first in this radial circuit as can't really access the first junction box?

Cheers mate thanks your help

OK thanks, I was just a bit concerned after watching this video say it needed to be on a 20A

There is one for the cooker, this is separate it comes strait from the fuse board( which was renewed last year)

Hi all so I have a 6mm cable on a radial circuit on a 32rcbo that goes into a junction box with 2x2.5mm t&e coming out going to 2 sockets is this safe or not