Hi all just got a new cooker hood I already have a fused spur with a 3amp fuse fitted and coming out of that I have 2.5 t&e, the hood had a plug which I have cut and it only has a live and netural. So is 2.5 t&e overkill going to the hood and do I just need to terminate the earth in the connection box with a wago?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Cooker hood
- Thread starter teeee91
- Start date
- Joined
- 8 May 2017
- Messages
- 10,479
- Reaction score
- 2,775
- Country
Terminate the earth conductor in one of the unused terminals of the connector block ,after sleeving it green/ yellow.
The 2.5mm t&e is fine ,albeit larger than required,but that makes no difference .
Where is the choc box going to be located ?
The 2.5mm t&e is fine ,albeit larger than required,but that makes no difference .
Where is the choc box going to be located ?
Cheers mate
...or you could just run the hood flex directly to the FCU 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
