Recent content by The Pink Panther

What part of your budget are you using for your rewire?

Do you think you could handle 12" Lucypop?!

It does not matter as they both have fuses in the plugtops.A 13a sockets do not mean no more than 13a may be pulled.It's merely a term for the facility to use of a plugtop.

I have a whirlpool superflow jacuzzi bath with a pump of the same name underneath.The ceramic seal and the impellar housing with the same ceramic seal has lost its ceramicness and causing friction preventing the motor from spinning.I've been told I can't get these parts as spare and a new motor...

Has anyone who replied ever tried to sell a house with an old fuseboard?The reason being if you haven't then how the **** do you know.You will have a surveyor pick up on the dated electrical installation and the prospective buyer, who is having the survey done, will then haggle with you to...

Hi, does anyone know where is the best and cheapest radiators either on-line or plumbers merchants?Cheers.

Why not give it a whirl and see!

Ignoring all other pathetic sarcastic comments, look which way your neighbours ones point and align accordingly.

First house with three floors!Must be very very affluent!!!

Thanks for replying guys.The pipes that go to existing rads are about 10mm2 diameter.The flow and return leave the boiler in 22mm2.Can I just put a t on the ends of the 10mm2 or do I have to go back to the larger pipes and t there to ensure adequate pipe size and flow are met?Cheers.

Sorry if I answered incorrectly.It was because there is only one tank in the loft that feeds the boiler and its from here that the feed to the hot water cylinder comes from.The cold water is mains fed in the kitchen with pipes coming off to upstairs bathroom and one to loft for tank in there.Thanks.

Hi Chris, thanks for replying.The cold water tank is in the loft which feeds the boiler which feeds the cylinder which is in the cupboard that backs onto the shower.The cold water pressure seems fine.When the bathroom was altered the plumber sugested another tank in the loft or a pump.What...

Thanks for replying guys.Can I run this scenario by you.My mother has an old 8ft rad in front of window.New patio doors being fitted.Now been decided 2 smaller rads to be repositioned either side or the doors on the dwarf walls that will be there when doors fitted.When I lift the floorboards up...

Thanks for your reply.Forgive me but what does the f+e stand for.I will do a search now.

Hi all (again), I need to improve the pressure coming from my shower.It is fed from the heating system cylinder tank which is in the cupboard next to the shower on the same floor.I think thats why the pressure is so low.Could I fit an in-line pump on the hot water pipe feeding the shower...