tomredsky's latest activity

  • T
    tomredsky reacted to Wayners's post in the thread Filling hawk? with Thanks Thanks.
    Small silicone or rubber mixing pot and a silicone kitchen spatula
  • T
    What do folk use to knock up and hold their filler? I've been using this old biscuit tin lead for the last decade but I suspect there...
    • 1000104039.jpg
  • T
    tomredsky reacted to Wayners's post in the thread Which Emulsion with Thanks Thanks.
    Any durable will have a higher sheen than a flat matt. The colour pigment is inside the paint resins so when you rub against the paint...
  • T
    tomredsky reacted to Wayners's post in the thread At what stage should I Caulk? with Thanks Thanks.
    First thing is to get some masking tape around the window to keep clean. Top of the masking tape edge level the best you can with the...
  • T
    tomredsky replied to the thread Sap and knots.
    I had the same problem. I've just laid a laminate floor and I noticed a small pool of sap on it from the door linning. I scrapped it off...
  • T
    tomredsky reacted to endecotp's post in the thread Sap and knots with Thanks Thanks.
    It’s a filler where you mix two components together. One is a “hardener” that is a catalyst that starts the reaction that makes it...
  • T
    I read this thread https://www.diynot.com/diy/threads/caulk-around-window.403697/ And I have a similar issue. I had already put a bit of...
    • 20260531_123345.jpg
    • 20260531_123339.jpg
  • T
    tomredsky replied to the thread Sap and knots.
    What's a two part filler? I just ran the hoover over an knot hole I'd filled and the polyfiller got sucked away
  • T
    tomredsky reacted to Wayners's post in the thread Sap and knots with Thanks Thanks.
    Dig out bad knots or problem areas and you can use 2 pack wood filler. Aluminium primer I used on my pine stairs as the knoting...
Back
Top