Sorry to read of difficulties with your Triton product.
The Mechanical Headworks (flow valve ) would appear to be the part required which is still available via our Spares Dept and may be ordered by telephone on 0844 980 750.
I hope that this information is of help.
Best Regards,
Karl...
Sorry to read of difficulties with your present product. We presently have our Etana and Martinique units available via our Spares Dept who may be contacted by telephone on 0844 980 0750.
These models will provide like for like replacements with regards to shape / size / fixing points and...
There are number of possibilities that could be causing he symptoms that you have presented. The previous suggestion of a blockage is quite a common cause so well worth checking in particular the inlet filter and shower head. If problems continue the Triton Service Dept can arrange a service...
The only way you would know for sure with regards to the actual water pressurewould be for a plumber or person with a pressure guage to take a reading for you.
To be fair, we do not see too many sites where running ater pressure is above 5 bar, but without being on site with the unit of...
Sorry to read of the problems with your Triton product.
The key problem here seems to be the stiffness of controls. There will be a certain resistance - ie the controls will not spin freely as we want them to remain in their set positions during operation. However - the contols should not...
Hi
The information given by our Service Dept and also Seco Services is correct. On the basis that you have one of our Triton Aspirante Electric Showers then in order to allow full and correct operation a minimum running pressure would be required. In order to achieve this a cold mains feed...
I assume that the problem highlighted by the original post has now been sorted as it was sometime ago but hopefully some information which may of help / interested to other parties should they require help.
The symptoms reported could be caused by a number of reasons - the Power PCB for...