Recent content by visage

  1. V

    Cutting a 150mm hole in a wooden garden office wall

    Yes - this on the inside wall - https://www.amazon.co.uk/Flange-Plastic-Ventilation-Ducting-Spigot/dp/B07ZDD21G6/ref=sr_1_6?crid=1GK6N3XXEQV9Z&keywords=150mm+wall+plate+spigot&qid=1652707633&s=diy&sprefix=150mm+wall+plate+spigot%2Cdiy%2C50&sr=1-6 and this on the outside -...
  2. V

    Cutting a 150mm hole in a wooden garden office wall

    Yes. And based on the comments above I think I'll go with the stitch approach.....
  3. V

    Cutting a 150mm hole in a wooden garden office wall

    Im fitting an AC vent to a garden office. Its double skinned with insulation between the two. Should I just bite the bullet and get a 155 mm hole saw, or is it easy enough to drill and stitch multiple holes? Feels like a hole saw for a one-off job is a bit much, but dont want to end up cursing...
  4. V

    Fixing sleeper wall to existing brick wall?

    Hi, Ive got a brick wall at the back of my garden. Its about 90cm high and 4.5m long. Im intending to replace it with 100mmx200mmx2.4m sleepers - 5 courses of 2 sleepers end to end sited on their narrow (100mm) side. I think there are 2 options: a) Retain the existing wall - its in good...
  5. V

    Aqualisa aquastream pump not responding to water flow

    Thanks Is there a quick way to test if that is the problem?
  6. V

    Aqualisa aquastream pump not responding to water flow

    Hi, Recently I had a strange problem. My shower was running normally, but when I turned it off at the dial the pump kept running (normally it stops). I switched it off at the mains. Now the pump doesnt respond to waterflow. Turn the power on, and the pump runs, turn it off and it stops, in...
See more
Back
Top