SBC Lampholder?

securespark · 11 Dec 2015

Hi guys.

I am renovating a shell table lamp of Mrs Secure's.

The pendant-type SBC lampholder (insulated) is broken.

Out of touch old fart that I am, I thought it would just be case of looking one up on ebay or such like.

Seems they no longer exist.

Don't suppose anyone knows where to get one from?

Cheers folks.

ericmark · 11 Dec 2015

The advert here looks just like an auto bulb so may be you can find a suitable auto bulb holder? But since TLC seem to do them easier to buy from them as then you know good for 230 volt.

securespark · 11 Dec 2015

Sorry, didn't make myself clear!

The brass ones are too long. The internal length of the shell is such that the existing lampholder (4cm L) plus a pygmy 15W SBC lamp is just the right length.

securespark · 11 Dec 2015

Made a temporary repair to the broken lampholder with Quiksteel!

stillp · 11 Dec 2015

Photos?

amjmfareham · 11 Dec 2015

Hi Securespark,

You may have some luck here: http://www.spares2you.co.uk/Lampholder_Fittings/Small-BC-Lampholders/

I have bought lampholder bits-'n'-pieces from here in the past and have not looked back!

Hope this helps!

Kind Regards,

Andrew!

PBC_1966 · 11 Dec 2015

Mostly brass, but you might also download a copy of the S. Lilley & Son catalogue for all sorts of lampholder-related bits & pieces:

http://www.s-lilley.co.uk/

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

SBC Lampholder?

Similar threads