Baxi 105e inlet manifold

D

Daviesmith

Joined
29 Aug 2020
Messages
132
Reaction score
5
Country
United Kingdom
Can anyone tell me how to find the filter on the baxi 105e inlet manifold?
 
Good video but the 105e also had the filling loop connected to these valves . bit of an omit from baxi
 
1000034206.jpg
 
gas112 said:
Good video but the 105e also had the filling loop connected to these valves . bit of an omit from baxi
Click to expand...
Hmm, I saw this on the video, but he said it was on the later Duotec and Platinum ranges.
 
Hi again when I drain the boiler down to clean the filter im also thinking of changing the pump as it's a bit noisy. Is it ok to just fit a new pump head ?
 
Don't forget silicon grease on the pump rubber washer and take the screw out of the automatic air vent
 
Any tips on refilling the boiler? It usually takes me ages to get all the air out
 
Just about to start changing the pump and was looking around inside the boiler. Should the pin in the picture go flat ? , that's as far down as it goes
 

Attachments

  • PXL_20251108_111756873.MP~2.jpg
    PXL_20251108_111756873.MP~2.jpg
    243.5 KB · Views: 20
That looks ok as it's not touching the micro switch . It will probably drop further when the system is cold
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
You must log in or register to reply here.

Similar threads

gas_man_gaz
1 for the baxi boys
Replies
6
Views
1K
gas_man_gaz
gas_man_gaz
M
Baxi 105e pcb
Replies
2
Views
947
micpwelsh
M
W
Baxi 105e Manifold filter check
Replies
1
Views
3K
petit_pablo
petit_pablo
B
working pressure at boiler
2 3 4
Replies
48
Views
5K
Bamber gaspipe
B
E
Exploded diagrams for Baxi parts
Replies
13
Views
22K
electronman
E
Back
Top