1/2" to 15mm pipe connector

Status
Not open for further replies.
A

asnoop20

Joined
27 Dec 2015
Messages
192
Reaction score
9
Country
United Kingdom
Trying to find a connector that goes from 15mm pipe without the need for two brass pieces to a 1/2" connector.

In other words, replacing the one on the upper right with the one on the left. The snag is the copper as about 3mm of pipe internally which will prevent a flush fit.


I could cut the excess off and it is tempting but it feels like there's another correct connector for the job?
 

Attachments

  • 20251201_123627.JPG
    20251201_123627.JPG
    330.1 KB · Views: 47
asnoop20 said:
Trying to find a connector that goes from 15mm pipe without the need for two brass pieces to a 1/2" connector.

In other words, replacing the one on the upper right with the one on the left. The snag is the copper as about 3mm of pipe internally which will prevent a flush fit.


I could cut the excess off and it is tempting but it feels like there's another correct connector for the job?
Click to expand...
https://www.screwfix.com/p/flomasta-brass-compression-adapting-female-coupler-15mm-x-1-2-/93992 ?

I struggling to understand what you are looking for. What does it connect?
 
asnoop20 said:
but for next time at least I wonder if there's one without the additional copper.
Click to expand...
The one I linked to? But no, there isn't a loose ring version like that. Is it for a toilet cistern, or what?
 
asnoop20 said:
So back to the question, there's no other piece to do it, it's brass piece then brass to 15mm/olive, 4 nuts (the one I have top right in picture)?
Click to expand...
No. But gas advice is not allowed.
 
Are you trying to join 15mm copper pipe to a washing machine isolater
 
asnoop20 said:
I know you guys love it, but let's say I'm connecting to a toaster - a water cooled toaster.
Click to expand...
But you aren't. DIY gas work is illegal, you aren't competent.

It's against the forum rules, and common sense, to advise on this.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Status
Not open for further replies.

Similar threads

D
1/2 x 15mm flexi tap connector and 3/4 x 15mm flexi tap connector
Replies
5
Views
4K
HERTS P&D
HERTS P&D
Bk006
15mm female thread to 3/4 inch male adapter
Replies
5
Views
5K
ianmcd
ianmcd
D
Connector for tap with threaded tails. And should I seal the washer?
Replies
3
Views
495
DIYNotIan
D
B
15mm to 10mm Reducer?
Replies
8
Views
2K
Bobbya82
B
D
best way to connect 10mm fastfit pipe to bathroom taps with 1/2"
Replies
6
Views
5K
sjmac
S
Back
Top