Trying to find a connector that goes from 15mm pipe without the need for two brass pieces to a 1/2" connector.
In other words, replacing the one on the upper right with the one on the left. The snag is the copper as about 3mm of pipe internally which will prevent a flush fit.
I could cut the excess off and it is tempting but it feels like there's another correct connector for the job?
In other words, replacing the one on the upper right with the one on the left. The snag is the copper as about 3mm of pipe internally which will prevent a flush fit.
I could cut the excess off and it is tempting but it feels like there's another correct connector for the job?

