Search results

At my last house I used grit sand to level soil, put a membrane on that then the fake grass. No issues. I’m doing some now and plan to do it the same way but inside a timber frame of 3x1

I’d have slabs all over. Wood chip = cat toilet.

We cracked on today, the ceiling are 16cm lower but still seem a good height.

It’s a bit bigger than standard but you should be able to get something from one of the merchants or online. You will have to replace the lid and frame.

I’d use a 50mm slab on a full 50mm of sand/cement. See how you go with compacting the mot.

Does the unit have no back panel and the boiler fixes straight into the wall behind? Daughter wants her boiler in a full height unit (230x60cm) in this corner. Would the heating engineer want to fit the boiler first then she can put the unit over the top or does the unit want to be in place...

Is it black plastic or copper pipe?

Your ton bags will measure more like 800x800x800mm rather that a 1mtr cube so you would need more than 6.6 to get 100mm over 66mtrs.

I’ve been relating some bricks that have been an Internal wall for the last 85years. I have to submerge them in water for a few minutes to stop them sucking the moisture from the mortar.

Google it :LOL::LOL:(y)

What 22year old would want to join a group like that rather than being out pumping some pussy?

I think it was too low, definately lower than the basin waste and not much higher than the water level in the toilet.

The one that goes on you head or up yer fanny? :LOL::LOL:

Vertical.

It’s in a cellar that’s has smells, no access from inside.

Nige going off his head, the Mods had to step in and give him a temporary ban :whistle:

I’ve ordered the 6x2 to come on Wednesday. She doesn’t have anything to store up there yet with her being a first time buyer but no doubt, with being a woman, she will soon have a mountain of crap up there :LOL: I was also thinking should I screw or bolt to the rafters? The small stuff there...

I’ve done one. No.1 - I screwed it as you said but didn’t use silicone, reason being I thought any water that got past the trim would drain out onto the cill. No.2 - I had a few baypole screws fail when going through 2 lots of metal. I just binned the failed one and the next attempt with a...

In my head I would replace the 3x1 hangers with something bigger like this picture (random add that popped up on my phone): The roof in her house actually has 2 sets of purlins.

You can see it on the last pic