Search results

where do i fit this valve , just below the hot water tap or other place?

thanks guys :huray: found this , is this th one? http://www.toolstation.com/shop/p54389 at £25 quite expensive. where do you fit this ? under the sink? might try lightning suggestion. Read more: http://www.diynot.com/forums/posting.php#ixzz1HeLfMFoS

hi guys , water pressure in my kitchen tap is very high, HOT Water &cold water , when i open tap, water splashed back on the floor. i can reduce the water pressure by turning the knob slightly but then boiler does not comes on.it seems i need to open the knob more than half way for the...

thickness of the tile will probaly be 1inch at best 1 and half inch with grout. i have not bought the tile yet but i am not going for expensive heavy tiles. so i dont think its gonaa be very thick. even at 1and half inch rasied i dont think it will be enough,. i need atleast 2/3 inch to go...

hi guys i am trying to install a toilet. to install it i need to raise the height of the toilet pan by 4 inch so the pan connecter will go over the central heating pipe and will connect to the soil pipe .i know you can use the flexible pan connectar but i am not happy to use it . i heard there...

it does have isolation valve under the boiler on the flow and return pipes. why do you ask? i was thinking of commpression fitting as soldering on a wet pipe does not bond as told by many post. what do you recommend? i have attahed a photo of the isolation valve i think under the valve...

i can only see 4 wire 2 red twisted together and 2 black. out of 3 holeon the socket , 2 red in 1 and 2 black in other 2 hole.. which is earth and which is live? also its not a table lamp its light socket in my loft fitted on the wood batten thanks

are you saying i dont need to connect red wire to the holder ? just leave it out.? but at the moment both red wire conected to one of the hole in the broken batten holder as well as 2 black in other 2 hole. if i leave both red out , then there are only 2 black wire left. no earth wire i could see

thanks for the quick reply.. what other better or if possible shorter way to do it . plz do enlight. bleeding the pump could be a problem as the pump facing wrong way. i cannot access the screw that i need to turn to bleed it. attached a photo of the boiler. any other way around it would...

as you can see red pump is not facinf outword so i can get access to the screw.

Hi guys i need to move my kithecn radiator 20 cm to the right. as i understand , to do that first i need to bleed the radiator then after work refill it using the loop. i got Glow Worm Swifflow 75/80 boiler. after reading lots of post i made a list of the thing i need to do to complete the...