Search results

Like that

Are shower trays any good that have threaded bar screw in legs as a riser kit?

Thanks a combi would only get it above 48c in the summer. With a 35c rise it needs the incoming water to be above 18c. I'm sure when I did college level 3. 2015/2017 that it was just for storaged water. But this appears to have changed?

Do these need to be fitted on all baths, even if supplied by a combi. Or is it still just for stored hot water? Thanks

Do you tend to fit them on every radiator drop. Even if in say the lounge? Or are they seem as insightly

Do they have potential to leak or are they usually ok long term?

Are these good/ reliable?

Small

Yes putting silicone/ct1 over the crack could seal/ maybe not?

Is there any repair for this bar the proper one of removing the tile and re fitting?

Does anyone that uses 15mm service valves to pipe up toilets. Put the hep2o flat rubber washers in that come with there tap connectors? Instead of the fibre washers?

15mm 3 meter lengths

If wanting to bend coated copper is it doable if you peel back the coating on the section you want to put a bend on?

If turning of the water to do work in the kitchen, with an unvented cylinder on the 2nd floor. Am I correct in saying turning off and draining the water won't effect/drain drain the cylinder, just the pipework?

Spring return means if it falls it goes to the off position?

So a normal 2 port will do for an S plan on the primary flow to the coil?

Does the 2 port valve that's fitted on the central heating flow to an unvented cylinder coil. Have added a added safety device on to over a standard 2 port valve? To stop over heating? Thanks

How much should it cost for a plumber to swap a bath waste and trap?

If needed could you put new washers in from another Flexi?

No need to swap the washers in the flexis or anything?