Search results

All sorted now I replaced it with anothe sel tapping valve with had the rubber and it now stopped leaking. Thanks for all your replies

No it did not, I have checked the package

I have added a self taping valve to a pipe, but it still driping I have tighting it up. But leaks were the hole was made. What can I add or do redtify this ? I have attached a photp

I have remove this stopcock under the kitchen sink , and replacing it with a new stopcock due to old one leaking, I am unable to drop the 25mm nut onto 25mm pipe. It seem too tight I am even bought another stopcock but the same problem. The 22mm end fits ok. The orginal nut fits on ok. Any ideas...

On Thursday I couldn't get the stopcock tool from the various Plumber merchant, I decided to look at my neighbors outside water valve I notice one in there so I borrow it, mine must go taken or one was never in. Thanks you all replies now the task is remove the stopcock ...

No the leak is not from spindle, it seems to be coming from well below the spindle. I want to replace it completely. So if I can the mains valve from outside would help me get removed.

My mains stopcock under the kitchen sink is leaking, so I want stop the outside mains water supply what stopcock do I need to lock it. See picture the orange in the pictue be turn off. I bought Stopcock key 222mm but does seem open Any ideas would be grateful...

I am thinking of putting the hood underneath the coving, as it I not extracting to the outside. It used as recirculating within the hood. I know it will show a gap.

I noticed if I do that the coving willl cover the vents of the hood on the both sides.

I want to install a cooker hood as shown below but on the wall the coving seems to be in the way, I will be using the the cooker hood as recirculating hood. Do I need to remove coving to make it level to the ceiling. I pplain to remove some of the tiles as well. I would like advice if I...

Any ideas on the best way to remove biro marks from beechwood ?

I definitely did put linseed oil on the top and underneath the worktop, what's the consequences of not putting it on out of interest ?

Not sure is pictures were displayed in last post

I have installed a new beech worktop but while doing the kitchen, the worktop as shown have mismatched colours , what oil can I use to make them the same and any ideas will help. ? Thanks Debo

Thanks for providing this diagram, will hope to apply this. Great for your support. Regards, Debo

Still trying to work out how that would look, any idea of picture or parts to buy ? Thanks Debo

I hope thes pictures help Thanks

The pictures shows the dishwasher the 1st one show were the dishwasher was going, the waste pipe shown on at on the back wall on the floor, th dishwasher on the left

I am currently in the process of installing an integrated dishwasher in the kitchen, my concern is to do with with drain hose connection, because the washing machine is currently using it, and is only adapted for one hose. As the waste run horzontally on the floor via waste pipe behind the...