Search results

Hi All Update on this. Used chisel to remove the rock hard silicone. Unfortunately, this has resulted in a few cracks and holes where silicone was attached to plaster. The dark area is residual mould from the leak. Cleaning it frequently but guess it could takes ages to dry out? When it’s dry...

Just tried quite a few of the twigs (low down). Thankfully, still v green. Thanks again.

Thanks for all these helpful responses. Last time I checked, think soil was pretty neutral.

Hi Thanks for previous advice on dead heading hydrangeas. We planted two azaleas (first two photos) and two fuchsias (second two photos) late last summer. Neither of the azaleas flowered and just about survived winter. One (photo 2) is particularly withered. Ditto fuchsias. (Photos 3 and 4)...

Sorry to be thick but can you highlight where exactly to cut on these images. (First one is slightly less dead flower) Also is it just the main stem or the branches? Thanks again.

Thanks. Yep planted last year.

Thanks both. Would you dead head in same position on both plants? It’s just that one is very withered.

Hi Have two hydrangea. One is more dead than the other. Should I still dead head, even at this late stage? Thanks

Thanks. We always seem to end up with an appliance with a part which is unusual or difficult to access/remove. The machine is only just over two years old. Why would the same manufacturer design some (vast majority, according to YouTube) with plastic/easy to remove and then these ones requiring...

Hi again Quick update. Have reached out to LG, and they’re going to see if we’re covered by the “extended five year warranty”. Knowing our luck, we won’t be. All other things being equal, they advised that only a qualified engineer can remove the drum lifter. I’d take that with a pinch of...

I can’t shift it. Tried pulling back to front of washer, lifting, left to right. I think the only way it will go is if I snap it upwards and backwards from the loose end. Not sure that’s a good idea.

Many thanks for these helpful responses. These are the “paddles”. https://www.4lg.co.uk/drum-lifter/product.pl?pid=5343337 Will try and slide forward to release. Thanks again

Thanks. The problem is I can’t seem to manoeuvre it off from the end attached. Tried up and down and left and right to no avail

Hi All We’ve got a two year old LG washing machine. Noticed today that one of the small metal plates sitting on the drum has become dislodged. (Photos) I’ve tried resetting it but no cigar. Also doesn’t help as it’s still attached at the other end. Is there a quick fix for this issue? Thanks

It’s odd. I thought I’d solved it. Tightened so that none of the external thread on the isolator was visible. Connected water and it was shooting out. Guess it pushed the washer out of kilter? Normally, there is some of the thread visible when tightened fully. Is that what you’d expect? All I...

Wiv and wivout. Tightened as much as I can but v slight drip. Ta

Hi Will do. It’s only dripping once every 40 seconds now. Er indoors had to put washer on. (Bowl to collect drops) Will provide photos shortly. Thanks again.

Another picture. Looks fine to me. Have noticed that the old washer sits more snugly in the hose. Ie the lugs secure under the ridges on the hose etc. The new one just falls out easily. Thanks

Hi T Yes clean and flat. Trying to tighten sufficiently without over tightening. The problem is you’ve got to do some jiggery pokery to connect due to angle of isolator/supply. Thanks again

Hi again Bought these 3/4 hose washers as replacements. Fitted but leak still present. The only difference appears to the lugs and on the old washer, thickness and bigger filter. Diameter is the same. There’s no washer in the isolator so has to be this one causing the problem. Have included new...