Search results for query: Bdr91 hive

Hi all, Would be greatly appreciated if you could help me with this: I have connected the cables in this order (single channel receiver). BDR91 N to Hive N BDR91 L to Hive L BDR91 A to Hive 2 BDR91 B to Hive 3 In the application/thermostat, the receiver does kick off when the central...

Hi can anyone help? I would like to change my BDR91 to a Hive single channel receiver. My boiler is a Glow-worm Betacom 4 combi boiler. In my BDR91, cabling is as follows N - Blue L - Brown L - empty A - Black B - Grey So to install Hive receiver is the cabling as simple as Blue to N Brown to L...

I’ve recently removed a Honeywell BDR91 wireless receiver and controller and installed a Hive dual channel receiver in its place. The Hive is now hardwired using the existing backplate, with connections to Live, Neutral, Earth, and the three switched terminals 1, 3 and 4 for central heating and...

Hi can anyone help? I would like to change my BDR91 to a Hive receiver. My boiler is a Vaillant Ecotec 837. In my BDR91, there is a cable from the boiler and a feed from a fused switch. I’ve seen posts where there are only the cables from the boiler, so is it as simple as this?: The two blue...

Hi All, I just bought a Hive and want to double check the correct wiring. I have currently installed the Honeywell BDR91 (to Hive - Combi Boiler) like this: Would probably wire it as the following, but hopefully someone can confirm or correct the setup: Thank you!

Hi, I’m wanting to switch out my current BDR91 receiver unit for a Hive receiver. This is my current wiring set up in the BDR91 And I am unsure of how the wiring configuration will transfer to the new Hive unit Please advise Thank you

Hello, I currently have a Worcester Combi Boiler with a wireless Honeywell thermostat and BDR91 receiver. I am replacing this with a Hive Smart Thermostat. Just want to double check the wiring before I make the swap. Ive attached a photo of the current wiring into the BDR91. Thanks in advance...

Hi Guys, I’m trying to replace my existing BDR91 with hive hot water and heating socket but unsure what goes where, current socket also has switched spur into it as well, any help greatly appreciated.

Hello, Looking to upgrade thermostat. I have a valliant combi boiler and it has honeywell BDR91 installed with CM927 . Please see the picture of the wiring. Can someone guide me which Hive to buy from amazon as there are so many options and how to connect the wires. Thanks

Hey Currently have BDR91 receiver. I’ve been wiring the new hive system as instructed on the various forums. Having trouble connecting everything up. When power goes on the boiler starts up without being instructed too. Also when I instruct the boiler to turn off via the hive thermostat it...

Hi all! Our old thermostat controller isn't working anymore, so we are looking to do a DIY upgrade from the old Honeywell BDR91 to Hive. We would appreciate some advice from the experts on this forum! We have a "Vaillant EcoTech Pro 28" combi boiler, and I have attached the current BDR91...

Hello All, I am looking to change my Honeywell BDR91 and CM921 to an Hive Receiver and Thermostat. Correct me if I am wrong but as I understand. N to N L to L A to Common B to 3 And My earth wire to earth tether. What about the second L from the hive? Would appreciate the help.

Hi, I would like to replace my existing Honeywell ST9100C HW controller and BDR91 CH receiver with a Hive dual channel receiver. The system has an immersion tank for the HW. The BDR91 is wired as follows: The ST9100C is wired as follows: These 2 cables go back to a 10 way junction box...

Hi guys, After some wiring advice and guidance on replacing my Center BDR91 (BAXI combi) to a Have wireless thermostat. Ive added a picture of the current wiring. Any support would be greatly appreciated :) I know the question has been asked before I check the previous posts but mine doesnt...

Hello I currently have a Honeywell bdr91 ( wiring pic attached). I want to connect a single channel hive to my combi boiler. Glow worm ultimate 30c. Please could you tell me the wiring. Is it a straight forward swap. Thanks very much.

I have attached the pic of the wiring I am about to connect hive soon Fingers crossed i have removed the bridging wire between the 2 live terminals...as advised previously. Thanks I have not connected the hive yet The system is all working fine at the moment question is....when i do make the...

My first post here. So please be kind. I have a combi Worcester boiler with a mt10 timer. I currently have a Honeywell thermostat and receiver BDR91 (receiver below boiler) to control the temperature in home , I use timer to set when on/off and thermostat to control the temperature. Should add...

Hi all, Some advice needed I currently have hive single channel connected to my combi boiler. Current boiler didn’t have any thermostat to begin with so was easily wired in. I’m moving house and the current set up is a Honeywell BDR91. Advice on the wiring below Blue to hive negative Brown...

Hi I am attempting to change my Honeywell BDR91 receiver to a hive thermostat. When I have opened up the Honeywell the wiring is as below, with one of the brown live wires attached to the reset switch below. I only have 1 L terminal in my hive reciever, where do I need to put the second one?

Hi All, I'm having trouble wiring up my Hive receiver to my Worcester Bosch 37CDi Combi. I'm replacing a Honeywell BDR91 wireless receiver which only had 4x wires going to it L, N, A & B. I thought it would be simple enough to wire up the Hive receiver but I'm getting nowhere! I've...