Search results

  1. P

    Blanking cap for washing machine waste trap

    I have just fitted a new one of those fro m screwfix but it is open at the spigot end. Surely someone must make a blanking cap that size. Thanks for posting.
  2. P

    Blanking cap for washing machine waste trap

    Does anybody know where I can get a threaded blanking cap that is 50mm between the threads? I can only find 32mm ones. The 40mm spigot connector fits on my undersink pipework but need a blanking cap in case I have to disconnect the washer.
  3. P

    Hob extractor fan

    I have a 26 yr old Ariston oven, hob and extractor fan which were in the house when we moved in, a new build. Extractor has worked fine bur fan on/ speed switch has been playing up. Sometimes it comes on and other times it won't without giving the casing a whack. Does the switch panel lever off...
  4. P

    Smoke alarm wiring

    Thanks for advice everybody. Appreciated.
  5. P

    Smoke alarm wiring

    Ok thanks for that. Yes found out BRK had given up in europe.
  6. P

    Smoke alarm wiring

    Not sure if BRK ones are still about, will have a check.
  7. P

    Smoke alarm wiring

    There are 2 BRK wired smoke alarms in our house which came with the house as a new build. Though 26 yrs old they still work. (toaster on with kitchen door open!) I was thinking of changing them to something more modern. On you tube there are videos on how to do this. There is one with a kidde...
  8. P

    Back heater cover door seal on zanussi condensing drier

    Thanks for that. Have cleaned all the gunk out, what a job that was. Stuck the seal bit that had come off back on with glue. Have used drier once since with a clothes wash but leaking tended to occur with sheets or towels dry. Doing a towel wash today so will see what happens. If it still drips...
  9. P

    Back heater cover door seal on zanussi condensing drier

    I have a TC7103W Zanussi drier that is 16 yrs old and has worked ok until recently when it started dripping water. I could see at the back of the condenser unit that it was fairly gunged up so after watching utube videos I took the back heater and dust channel cover off. The panel was stuck and...
  10. P

    Ebay purchasing on tablet

    Yes I suppose it must be something to do with that. On some forums, mainly U.S ones, alot of people seem to have similar problems with Ebay payments. Thanks.
  11. P

    Ebay purchasing on tablet

    They have the bank account no saved I have never had a Paypal account, I just pay as a guest. That would not affect the problem though which is I can buy on my desktop pc but not on my tablets. Thanks for reply.
  12. P

    Ebay purchasing on tablet

    Not sure if this is software or hardware or both. I have 2 tablets, an old Android one that I keep for backup and a Fire tablet which I use alot. Up until about a year ago I used to be able to pay for Ebay items on my tablets, then they started to refuse payments. Ebay said it was Paypal at...
  13. P

    new oven electrics

    Thanks for that, it is alot clearer now.
  14. P

    new oven electrics

    I have a built in electric oven under a gas hob, both were in the house as a new build over 25 yrs ago. I may replace it soon as there have been a couple of problems with it. I do not know if it is hard wired in or plugged into a socket and the only way I can see to tell is to take out the oven...
  15. P

    1rad goes cold

    Just opening the lockshield valve fully seems to have cured it, so in a way I suppose it was a balancing problem even though I did not have to adjust any of the others. Thanks again.
  16. P

    1rad goes cold

    Ok thanks for that, I will try that and see how it goes. Thanks again
  17. P

    1rad goes cold

    I do not doubt your expertise but why should it suddenly need this after all this time?
  18. P

    1rad goes cold

    Definitely not touched any lockshield valves before this, about half an hour ago I opened the lockshield valve fully to see if any difference. Rad is barely warm while others are hotter. Does this point to an air lock? I opened the drain valve next to lockshield valve, water came out clear after...
  19. P

    1rad goes cold

    Yes but as I have not fiddled with any valves why should it suddenly start doing this after all this time? Thanks for your time.
  20. P

    1rad goes cold

    I know this problem has been asked before and I have looked at alot of replies but can I pick someones better knowledge than mine. I have open vent system which has been running fine for some years now. It had a power flush about 7 yrs ago and have not had to bleed a radiator since, before that...
Back
Top