Search results

It allows weep holes to drain and is not a cause of draughts.

Quick dry bonding followed by standard filler to finish .

Mine is stuck down , been just fine.

Why do you want to screw when it’s got adhesive.?

Doubt you could bend a jigsaw blade backwards they are rigid in that direction.

It’s a pub, money pit.

I just hot glue a small piece on mdf with a right angle bracket on it to underside so bracket locks down behind rad . Just lift cover over rad. Only requires one in centre .

Mask off Uvpc frame , then fill and sand damage before decorating.

Foam rollers blow bubbles into thin paint, mohair are better, you used to be able to buy short bristle rollers which gave a finish close to spraying but seen those in shops. Have always used ESP to prime cupboards much quicker and easier than sanding . Microfibre Short Pile (e.g., ProDec...

Foam rollers blow bubbles into thin paint, mohair are better, you used to be able to buy short bristle rollers which gave a finish close to spraying but not seen those in shops for a while . Have always used ESP to prime cupboards much quicker and easier than sanding .

Only if the existing tiles are secure, undamaged and grout is not cracking .

Takes a week or more before new plaster is dry enough to take a mist coat.

Offer corners in first keeping centre bowed .

Google “under cabinet g4 lamp “ check dimension match yours.

No point wasting money/ time if you are selling.

Replace with a g4 lamp holder, or gently bend the bulb pins to get a secure fit .

You can hire a 4wheel lift dolly from Travis Perkins, made lifting a 1200x1000 access slab easy .

No

Install oversize rad .

External ground level is too high . Any parapet walls at roof level with neighbours? Do they have damp issues?