Search results

Thanks. I have looked and it could be so many things, I have checked the basics. I get the flow would not be as strong which I didnt mind for safety reasons. My old Quooker tap would gush out. But this tap has gone from a steady flow to a trickle. The 3 in 1 is easier for me to understand but...

I had a look at this and the boiler unit we have is completely different by looking at that. For example we dont have a menu. I don't know why water is now coming out again after leaving it on around 40 seconds but is a very weak flow.

They have offered a refund. But I just wanted to see if there was something I could do that might rectify it.

Hi, We have a Proboil2 and 4 in 1 tap from Rangemaster. The tap is fine on all settings apart from the boiling hot water, we noticed the flow from the boiling hot tap seemed a little less, so decided to change the filter. This was done correctly. After this it is now even worse, the water was...

Hi, We used Mapei medium grey grout for the tiling but the matching sealant behind the kitchen worktop does not look good at all. The colour is quite different, perhaps as it's so shiny. Someone mentioned BAL grout effect but I wondered what one would be a good match or if there is an...

Thank you for the reply. What is the box? I'm not sure what that refers to. One joist is actually rotten at the end, directly below that door. We know all these joists were done in 1988 because the floor was laid with the laminate and not removed until my partner pulled it up. That area of...

My partner pulled up the laminate floor in our Edwardian house and discovered the floorboard next to the doors was rotten. It looks like there is no DPM. I'm not sure if you can tell from these photos. What are the options to resolve this? No point in replacing the boards until this issue is...

Thank you. It is an old Victorian staircase and the previous owner had placed a stud wall next to the stairs. when we removed the wall the side was missing and just a piece of damaged plasterboard sits there now in the shape and size I posted. I assume all sheets come in mostly width of...

Hi, What size piece of MDF should I get to create the shape and size? The max width I can find is 2200mm , so will it need to be created out of two pieces? Just wondered how you would go about this. It's to replace a damaged side of a staircase. Thanks

Maybe it's the same people . I had the exact same concern as it's the kitchen and there is a pantry door. I am not overjoyed as it means the kitchen unit will be closer to the door, which is not the look I wanted. I'm worried it's going to look silly now if the door is flush with the unit. They...

Maybe it's the same people :). I had the exact same concern as it's the kitchen and there is a pantry door. I am not overjoyed as it means the kitchen unit will be closer to the door, which is not the look I wanted. I'm worried it's going to look silly now if the door is flush with the unit...

Thanks for the advice. It is all sorted now with a new sill.

Well yes in regards to taking down a suspended ceiling, and putting in the kitchen. No discussion at all about plastering the wall.

Yes exactly. Surely anyone would know it wouldn't look great, so perhaps they hoped I wouldn't notice or care. I'm not paying extra either. Hopefully it will be fine.

Thank you. I was thinking of getting it cut for me, so it was more about how I fix it once I have it. As for it to fit there would be a gap between the plasterboard and the new piece of wood. Would it be just making some kind of frame attached to the plasterboard?

Thank you. It is down to the floor and kitchen units will run along it so no skirting. Perhaps that's why they put the plasterboard there so the wall was level. But there units there before.

Yes you are right. I think I tend to be too passive and get stressed out. I need to tell them to fix it.

Here is a photo. I'm pretty gutted about it as I am trying to keep all the original features. That sill has sat there for 120 years. I don't really understand the thinking.

Thank you. I will have to otherwise it's going to look ridiculous. Just the window sill flush with the wall looking like a lump of wood sitting in there. I wish they had asked me first. Previously builders have just skimmed the walls, so I was surprised to see two inches gone and the sill with it.

Thanks. I have attached two more photos. On the other side of the plasterboard is a layer of plywood which is basically the side to a space under the stair. You can see the door in the new photos that opens into it.