Search results

That’s a elmdene quartz 3000. It does have a cut off timer , that’s what’s probably stopped it ringing not a flat bellbox battery , the 9651 would have come up with a battery fault but that does not relate to the bellbox battery …

But you don’t really know do you ? It’s done it’s job after power fail….sounded and cut off , it won’t do anything untill it’s re-powered … I don’t think there is anything wrong with it

That’s the alarm panel

9651

As far as I know the 46/76 does not support ID devices , I think the older 162 panels did support a ID interface/ module , you would be better rewiring as it’s obsolete technology

Remove battery ….multimeter set to dc …what voltage reading do you get when you put the probes in the battery leads …

Did you do …what I suggested ? Powered up with the piezo disconnected ?

Why ? Only way I could see that working on an veritas is it was some type of entry stray timer / exit time expired sounding the internal speaker before full alarm

I hope…..it’s done every 6 months not yearly Also is it worth going to court IF something did go wrong and you were the last person to touch/ alter the fire alarm ? Think that £1000 would be a drop in the ocean …. Also get another quote ?

I would be looking at the psu ….it may be ok unplugged with no load …but no good with a load on it ….probably the cheapest option

Texecom premier or pyronix euro 76 …

Could have purchased a complete new bellbox for not much more …I have known the Honeywell AG6 bellbox bleep,if the nicad is flat ! You could try disconnecting the piezo sounder and leave it powered up for a few days to charge , then see if it bleeps

how much was the bellbox battery ….

That’s the glove ….stuck to the hot glass …see pattern on glass / glove ….you need to remove that off the glass

More capacity..

Unfortunately most mains pirs are rubbish these days . I only fit GJD lighting systems now but most people don’t want to pay the price

Be fine …as long as it will fit size wise ..they are made up of flat button cells , 5 in 6v version 6 in a 7.2 and 7 in a 8.4 ….each being 1.2v they are only about 3mm extra per cell What bell box is it ?

Ask ring …

It’s not a sounder output ! looking at your device ….its an output to link to a sounder unit that needs batteries to make that unit ring

Probably because that sounder requires batteries to work …it’s not just a sounder / speaker ….