Search results

Thank you. I made such a mess of the other skirting when I took it off, the wall behind just crumbled away. I'm not if it was me or if the walls were just not great to begin with. But if I can be done without too much damage then I will get someone to do it for me who will make good.

I mean the chamfer profile detail. In the image, where it shows 40mm. This is what I asked my local supplier for and instead they delivered 25mm. Maybe they to didn't understand but they didn't ask for clarification unfortunately. They have now confirmed they don't do 40mm. I have enough of the...

Hi, Renovating a 1930's room, we ripped off the skirting board that was damaged ready for plastering, leaving a 4 meter length of the original skirting (under a bay) and some on one wall up to the door, as it was not damaged. I was told I could easily get to profile match. Anyway had the room...

Thanks. They are reputable, I was recommended by neighbours. Those are good questions, thank you. In regards to insurance is there a way to check a company online?

Hi, We live just outside of London and been quoted 34k for a 20m2 extension. It does not include the windows. Basically it's at the back of the house, knocking down the external back wall to make a large open space for a kitchen/diner. Also should there be any specific questions I ask in...

Because it's so old? Is it safe?

Hi, I removed my hearth and I can see a capped off pipe popping up under the floorboards. Could this be a gas pipe? I was considering a gas fire in the fireplace but had quotes which were expensive as they were assuming there was no gas supply to that area, so would need to run around 5m of...

It's for one side of the room, so one 15 ft long wall and a wall next to the fireplace which is around 3 ft.

Actually doing a "40mm" search I have found some online. The issue now is the room is 15 foot in length, they don't come in that length. Its either 13.78ft or 10ft. Should I get two 10ft or one 13.78ft and one 10ft or does it not matter? Just wondered if the join would look better dead centre...

Thanks, I have been looking online and only one company seems to show the profile detail size, but it's 37mm and not the 40mm I need. I will have to get it made, it's a little annoying that most sites don't have the profile detail size as it may already exist.

I am trying to replace skirting from a 1930's house, I was told by a builder i could still get the correct size but I am having issues. There is lots of Chamfered skirting online but where it slants off is different and I can't seem to find any that matches. The height is 12cm, depth is 2cm...

Thanks. Yes, I am going to get them sorted and to go under the floorboards to tidy it up.

Thanks again for all the help last night. It's been sorted today, just had the radiator removed and capped for now until the room is plastered, then will have it replaced.

Thanks, yes I closed it straight away and the water has now stopped. It was dripping from the other part until I stuck the cap on.

Do these help? p.s the walls are getting plastered, they don't always look like that. :)

Yes, it goes directly to the radiator. That pipe goes to a left side valve with a red valve head on it that won't turn and the capped pipe was going to right side valve with a blue valve cap that does turn to on and off.

Ok thanks, I wanted to take this radiator off next week for some work that is being done. With that cap in place is it safe for the boiler to go on? I could try in the morning if that is the case. Thanks for all the help.

Here is a pic. Looking at it again, it looks like that connector has come loose. Someone did rip out the skirting, so I am wondering if they damaged it earlier and then my vacuum just dislodged it. Could I just clamp it back in?

Thanks so much. I just found one and pushed it onto the end. I actually dont think it has snapped, looks like at some point the pipes were joined together using some wrap around metal, that has decayed so the pipes came away from that join. So sorry I don't know the technical jargon. I will get...

Thank you. I will do that, I think I may have a push cap somewhere. If I find it, would that help as a quick fix to cap the pipe?