Search results

Hi all I am going to be updating the en-suite soon and looking for a new pivot shower door if possible but the gap is 717mm wide , can anybody tell me what size door I need to buy, do they come adjustable or if not and I need a bifold what size do I buy that will fir please. Regards

Mixer has been in 20 years , sealed system with tank , system boiler no shower pumps

Cold water comingin has a 3 bar regulator on the incoming, can you explain why it’s the new shower bar causing the mixer to misbehave please

Sorry , its the ensuite that has a mixer shower tap thats the problem not the new shower bar

Hi All We had our bathroom overhauled a couple of weeks ago including a thermostatic shower but since then in our ensuite which has a mixer shower the water in the ensuite when you turn on the water at the normal point the water runs that hot it will burn your skin we then turn it down a long...

Hi All I took of a bathroom door as I was doing up the bathroom but when I come to put the door back on ( I took the door off the frame keeping there hinges on the door ) now when I put the door back on the last 30cm opposite the bottom hinge now sticks out about 1mm I cant see how to get it...

crowbar and brute strength word :-)

thanks thats good to know , pity I didn't see it and after 10 holes I hit a screw not good

would a plug cutter work ?

photos attached thanks

Hi All I am refitting my bathroom and need to get up the old boards put down for the underfloor heating but they are screwed down and nailed but they are rounding the head if I try to get them up, any ideas how I can get them up as the crowbar method isn't really working thanks

I have a Telford Tempest about 15 years old no problems so far touch wood.

Thanks for your replies, I have sorted out the door sticking I basically cleaned out the hinge which was not cut into the frame properly and tidied it up. The doors was not at fault it was the door fitter who did such a poor job , he did not drill pilot holes , he ripped out the old hinges...

Hi All I had all my internal doors replaced about 2 months ago and a couple have started to stick when I clots the door as though they have swelled, how do I fix it do I plane off some of the door hinges or is there another way. I won't ask the original joiner back as his work was sub standard...

I have had some new MDF wardrobe doors fitted and need to paint them to match existing Dulux Satinwood, I have a tin of water based Zinsser to use as a undercoat, would that be ok ?then put Dulux satinwood on the top. Thanks

I think we had his brother to do ours, I should have guessed when he tied his horse to the lamp post.

Some of the handles stick down when opened

We have had new doors fitted and the fitter has not responded to our phone calls to make adjustments, so I need to know how to loosen or tighten these door handles please https://www.locksonline.com/OLTON-lever-handles-on-rose-zinc-alloy-69052.html?search=olton&description=true handle type...

Mine was fitted 18 months ago and neither has worked since been fitted, both going to be replaced this week, hope the power or gas doesn't go faulty with the time this has taken to be fixed.

Dont think its that as the Hive shows a target of 19 degrees , I think its faulty tbh but gotta get Hive support to sort out or agree