Search results

  1. C

    Shaver and toothbrush sockets

    Yes, inside a bathroom cabinet above the basin.
  2. C

    Shaver and toothbrush sockets

    Bathroom cabinets haver small sockets, that is what I am trying to source.
  3. C

    Shaver and toothbrush sockets

    Hi. I meant the cabinets with sockets are expensive, not the sockets.
  4. C

    Shaver and toothbrush sockets

    Hello! Bathroom cabinets with shaver and toothbrush sockets are rediculously expensive and also i am struggling to find one that will fit the space! Im now looking at fitting a socket into and "normal" cabinet. However, most wont fit the standard 150mm x 90mm x 55mm box. Are there smaller...
  5. C

    Unidentified conduit

    Not without ripping up more floor than I need or would like.
  6. C

    Unidentified conduit

    Thanks! I can see all the new cables in addition to the conduit
  7. C

    Unidentified conduit

    Yes. House required about 30 years ago with a mcb board.
  8. C

    Unidentified conduit

    How do I check if still in use??
  9. C

    Unidentified conduit

    Hope not.
  10. C

    Unidentified conduit

    I was thinking exactly that tbh, but wanted some confirmation or direct knowledge of same. Thanks
  11. C

    Unidentified conduit

    Hello. Pulling up floor boards in bathroom and I’ve come across what looks like a steel conduit. I say steel as one part is rusted. But what does it contain? Any ideas? I don’t want to cut into it in case it is of use, but I could do with removing it as it’s in the way. See photos. Btw, semi...
  12. C

    Outdoor wall lighting.

    I am thinking of installing up to 4 wall lights out door around my patio. To keep things simple I am thinking of plugging into the outdoor socket that I use for the lawnmower etc. I’m thinking of running the cable up and across the exterior walls and under the barge board. Can anyone advise on...
  13. C

    Replace Microbore with 15mm

    I have a pressurised cylinder with heater, but gas appears to be far more efficient at heating water. Is there no way of isolating the CH at the boiler? I accept your other points and advice, so thanks.
  14. C

    Replace Microbore with 15mm

    Hi. Wishing to change a meeting x of 8 and 10mm copper to 15 on all downstairs rads. This will cause me to drain the CH system and as I have a system boiler I will lose HW. As this job will likely take me longer than a day or so, is there a way of retaining HW. Also what thoughts do people have...
  15. C

    Overflow discharge from Unvented cylinder

    Hi thanks again. don’t know what you mean my s plan. Sorry. I’ve been quoted as follows Parts required: Inlet Control Valve £60.38 plus VAT 9m 22mm pipe £45.00 plus VAT 3m 15mm pipe £7.50 plus VAT 15/22mm tundish £6.89 plus VAT No of Engineers: 1 = 1 apprentice Time Required: 6 Hours...
  16. C

    Overflow discharge from Unvented cylinder

    Ok. Thanks for advice. can you indicate what needs to change??
  17. C

    Overflow discharge from Unvented cylinder

    Thanks so far. here are some pics of what I have. White pipe is overflow. Red hand wheel is cold water supply This shows overflow coming off top of cylinder Overall view. expansion vessel off to right - not shown. Cheers C.
  18. C

    Overflow discharge from Unvented cylinder

    Hello. I have a water discharge issue via the overflow from my unvented cylinder. The cylinder is overflowing only when the cylinder is being heated. It appears the muppet who installed it did not do a proper job and will not return to fix. I have been told that the pressure relief valve...
  19. C

    Hot Water & CH mix up?

    Thanks for quick reply. How do i diagnose / test this? I have all the covers off the pipe work at the moment and can see the two motorised valves.
  20. C

    Hot Water & CH mix up?

    Can anyone shed any light on the following? Hardware: Eco tech 624 - System Boiler NOT combi with a pressurised HW tank. What appears to be happening is; When I have my boiler set to heat water only, it does so and appears to do so to the set temperature. I've messed about with the tank...
Back
Top