Search results

Thank you. Didn’t think of that thanks.

Need some advice please. hit a little problem while connecting up a 32mm waste to a solvent Tee on the soil pipe. I've drawn the current layout below. Because the soil pipe a slope unfortunately the 32mm Tee that comes out of the soil pipe to join to the 32mm waste coming from the left is...

Is it something like this that I need; https://www.bes.co.uk/polypipe-32-mm-black-expansion-coupling-solvent-11850/

Hey guys, I’ve got a little dilemma hoping someone can help. So I have a designer black bottle trap which comes with a metal sort of 32mm pipe for the drain. Silly me I just assumed my 32mm solvent pipe will fit straight in. But realised the pipe it comes with must be for pushfit or compression...

I’m remodelling my bathroom, which involves a fair bit of new copper pipework and a layout change. To do this, I brought the hot and cold supplies to a central point and temporarily capped them with JG Speedfit end stops. Over the past 1–2 weeks I’ve been slowly soldering all the new pipe runs...

My home was a newbuild around 15ish years now and under the kitchen sink is one of those brass stopcocks labelled main water stopcock. It’s been fine all these years but recently I had to turned the water supply off and on a few times to do some bathroom work. Since then I’ve noticed that the...

My previous extractor fan that I’m replacing was wired with Live as the supply from an outside extractor isolator switch and the switched live was from the switched light Live. So if I turned on the isolator the fan would be running on low speed unless I turned on the light switch which powered...

Yes the window is double glazed.

I have purchased a Manrose 100mm In-Line Mixed Flow Extractor Fan and a ceiling vent that will hook up to this. I’ve currently placed the vent itself directly above the shower area where the steam starts. The extractor fan itself is in the loft and the run to the extraction point is relatively...

One side of the arm has considerably lot more threads than the other. The shower head itself that has the G1/2" connection is much shallower in terms of how many threads it has and seems to match more the end of the arm that has the lesser number of threads. And the other side has a lot more...

Thank you for this. The switch i have is pictured below and i've tried to replicate your above drawing to the real switch picture below. Is this correct below or does L1 and L2 config need to be changed? Thank you again.

Can I use a JG 15mm push fit end cap on the 15mm end of this following product: https://www.toolstation.com/hep2o-male-adaptor-brass-spigot/p77983 It's purely for a temporary application where I have this particular toolstation spigot available and also have a 15mm JG push fit end cap stop. And...

I managed to solder it. Soaked a rag and wrapped it around. It did get slightly warm even under the rag but not super hot and the plastic seems to have survived

I have a ceiling mounted shower arm that comes with a G1/2" connection for shower head and the other end is a NPT male 1/2" but is supplied with a BSP 1/2" male to NPT 1/2" female adaptor. But it does not mention which side of the arm itself is the NPT side and which side is the G1/2" side. Is...

Thank you for this

haha that was all planning phase. now getting it actually done lol

Will this work, isn't it essentially the same thing just use ptfe or loctite 55 on the threads (just wondering why everywhere that sells it refers to it as for garden taps)

I think I understand the diagram. This is what it does in practice: Ambient switch ON → Ambient and downlights come ON ❌ Downlight switch ON → Downlights and ambient come ON ✔ Either switch OFF → Both go OFF So it effectively makes both switches control the same combined circuit. What I need...

what about using a AC relay and putting the relay into a enclosure. something like below maybe

I’ve thought through the looping idea but I don’t think a simple loop will work for what I need. The wiring is currently as follows on one plate: Permanent live into COM of the downlight switch COM of downlight switch looped to COM of ambient switch L1 of downlight switch to downlights L1 of...