Need some advice please. hit a little problem while connecting up a 32mm waste to a solvent Tee on the soil pipe. I've drawn the current layout below. Because the soil pipe a slope unfortunately the 32mm Tee that comes out of the soil pipe to join to the 32mm waste coming from the left is leaning towards the right so now I don't have a 90 degree bend at all. If i force it, it does just about go in but because of the angle i'm assuming it won't seat properly and may no even seal properly even though it's glued. Also because of the angle the amount of pipe that enters the 90 degree elbow wont be as much as if it was correct 90 bend.
could really do with some advice on how to adapt this to make it work. It will be buried behind a stud wall and tiled so needs to be reliable. It is bringing waste from the basin.
could really do with some advice on how to adapt this to make it work. It will be buried behind a stud wall and tiled so needs to be reliable. It is bringing waste from the basin.
