Search results

hi all, i've had my extension plans drawn up and after they were sent to me he said i will need to find a structural surveyor. I employed a structural surveyor and he has drawn and sent plans to me, i've been sending those to builders to get a price. A question as i'm getting several...

I've had to call the gate installer today, daughter opened the gate with the fob, it now will not close with the app or the fob, it has power. Literally had it a few days and im getting bad vibes :) Are they always this unreliable

i have a sim card in there, if you call the gate it opens fully and then shuts after 1 minute of the sensors not being walked through. the remote has the top button as open fully, then it closes after a minute and the bottom button it opens about a metre but we have to push it again to shut it...

Hi ive removed the stump (hedges were here before) I was going to get someone to relay the driveway upto the hedges but budget cant stretch. instead ive bought a 5mx 1m artificial grass offcut, for a small area would you still MOT type 1 and then sand it and wacker plate it all down? or...

hi had a gate fitted and the remote buttons will open gate fully or they open just for a person to come through, if you call the gate to open then it only opens and closes fully, is there any way to set it to open like the the remote control. I have the NET230N DEA fitted as the control unit

looking for ideas on trying to tidy this gate channel/track, i cant make the concrete level as the gates wheel runs along it. i've clean with a brush on the stones, just looks shoddy but driveway is on a slope so the track had to bed in that side for a level gate. was thinking maybe grey...

Hi all im looking for some help I have the ecoplus 428, its about 7 yrs old, the boiler was initially showing a F.29 and a f.28 error code, but it was mostly showing f.28 when i reset. I bought a new PCB unit and the plumber replaced it friday, it was working after he programmed it to the...

its the transfomer which im assuming has broken as it wont switch off, can you swap out transformers for others and they still work, is there a generic wireless transformer

Afternoon all we have had a GET smart/wireless lighting system installed in our kitchen, it was fitted as part of the extension we had. Been in for about 10 years now, one of the ceiling transformers that controls lights over the island will not work, its always on and will not switch off by...

I havent tbh, but made the assumption that as the others were working then it couldn't have been the MCB. The only reason i noticed was we have some phillips hue lights in these sockets and they have been off for a week, i assumed that the lights just needed connecting to the app again

thanks I'll take look at those aswell. strange its basically around the floor area, the higher up sockets are all working, even if they are on the same wall length

yes your right thats what we have. perhaps i will move the switches up and down to check

morning all, ive attached a really basic drawing of what i'm trying to explain. we had a extension done about 10 years ago, last night i realised that some of the floor sockets have no power, i checked the main fuse board and no fuses have tripped. There are still some sockets which...

morning all, thanks for all the replies, im going to order part 17, the shut off valve, when i said it moves quarter of a turn it actually doesnt, if it was a clock it would only move back as far as 55 on the clock face and i dont want to force it. to replace the shut off valve...

im about an hour away from Colchester

i have spare tiles or do you think its worth getting someone in to fix

hi all, we have a few amtico tiles on the floor that have lifted, the floor has been down for about 12years , i havent messed with it yet but i get the feeling they will pop out at some stage, is it something i could do myself, buy some amitco glue lift and stick them down or replace...

evening last time i posted about the wall hung toilet i got so many useful advice and actually fixed it. so we have this (AXOR) shower mixer, the top dial which is the flow only now turns about a quarter of a turn, so water isnt that strong. there is a grub screw underneath which i didnt want...

yeah used long reach and the angle is such it can just about get on the nut but even a movement to the left or right. I've ordered a Short stubby ratchet spanner and also re ordered the fischer fittings to see if they help. im now starting to think that the lower wall where the bottom of...

something like this i dont think will work either as its not going to go over the rod to get the nut https://www.amazon.co.uk/dp/B09MD6J5WS/?coliid=IWUKPBPFESMT4&colid=1II1CQ09NNS4U&ref_=lv_ov_lig_dp_it&th=1