Search results

Laminate. Don’t lay LVT click on laminate underlay. Buy some quickstep impressive laminate. Great gear.

Do you have a decent knee kicker. Very important a carpet is stretched correctly or you won’t beable to vac it properly

Timbermate Excel if you can get it.

If it’s damp I’d put na / 1200 pro then go with a liquid Dpm like ardex DPM1c or fball F77

Why comment on a 16 year old post ?

Are you gluing or floating the wood . Is it plank or herringbone ?

It’s a 10 year old post

Stairrods do good trims at most heights

Not the Mapei. Ardex na Epoxy Dpm Ardex na

You could use asphalt as that’s a Dpm as well. Prob cost around £40m2

It’s hard to see in the photos. Could be magnesite but it would fail quick now you have a moisture suppressant on it. You should have used epoxy really. You be best using a moisture tolerant compound now. Ardex na , fball 1200 pro , bosmtik cl955 advanced

Merry Christmas to all the regulars. Have a great Christmas & New year.

You be better with a decent bag & bottle compound like Ardex CL or Mapei latexplan

Cat trims I’d say are better. Not sure what’s going on with SR at the minute. Had problems with my last 3 orders. Twin trims the top section not on correct. Also scratches on bendy bulls.

Ardex NA is still the best for that situation. I use them all. Should have used 2 units really. Fball should have told you not to spilt a bag up and you won’t get the mix exactly correct. Are the tiles glued direct to the asphalt ?

As the locking system is thin it breaks easy so they sell underlay at 1-1.5mm. Read the spec of the one you look to buy.

Not sensible. You can’t use laminate underlay with LVT click. To soft and thick. You need LVT underlay if it doesn’t have one in. Go 9mm plywood or 6mm if it’s flat. Maybe go glue down LVT. Moduleo Layred and quickstep alpha are the best LVT clicks on the market.

Scrape up anything loose Prime sub floor with water or 8-1 primer Screed floor at 3-4mm with one of these Ardex na Bostik CL955 advanced Mapei na Fball 1200 Pro Kerakoll pro flow Then Dpm it. Has to be a epoxy Ardex dpm1c or fball F77 is what we use

Get the builder or the floorlayer to get the tiles up. Wet them , double bag them and you will be fine. Then do a Dpm butty as that floor needs it. To be honest if the builder doesn’t know that then I wouldn’t let him touch the floor. Remove tiles and loose screed. Apply 3-5mm coat of ardex na /...

You need at least 5.5mm plywood down on the timber sub floor.