Search results

It's been sitting in wd40 for 3 days now.

Can't use another blow torch as the plastic on off button is right next to it

Thanks, I'll give that a try

Hi all, On my rothenberger superfire 2 the grub screw that you need to remove to replace the piezo has seized in place. I've tried wd40, various Allen keys and torx bits etc but this grub screw won't move. Any one else had this problem and managed to get this screw out?

Thanks for all the replies, I will see what my dad wants to do

The rest of the panels are showing no signs of rot it's just at the corners. That's why I was thinking of repair rather than replace.

On a lot of my dads fence panels the top corners have rotted as you can see in the image below. What is the best solution to this, splice a new piece in or replace the whole cross member? Obviously will replace the cap peice.

My nephew has booked me in for doing this job next Saturday morning. This has made me take a second look at the job, bottom of the image you can see the old flat roof felt poking out the bottom of the cladding. I will cut this material off the edge so the cladding piece at bottom will sit...

In the end I tried a third cable and its now working.

Been looking at cameras and they have been advertised with some form of AI which I don't want.

Thanks Rodders.

Tried a different cordless dect phone that I know works with router and it's also saying 'check phone line'. Tried another cable and still no joy.

Really I haven't heard that before, I will check that out thanks.

Will try that tonight

My parents have just had there old landline disconnected and a fibre connection made to the telephone pole instead. All is working except their new Panasonic dect cordless phone kx-tgu43eb won't work when connected directly into the sky router. Keeps showing check phone line. I've tried...

I'm not a roofer but isn't that what it's supposed to do as it always fitted under the batten and membrane and then has to come up and over the fascia.

Why didn't you make the new fascia the same height as the old one?

Hi All, I'm looking for a security camera to go on our garage that will connect to my phone but I really don't want any AI on it. Does anyone have any suggestions? Victor

Also do you think if I use the vent on the pan connector and route that outside that I could get rid of the sink AAV?

That looks rough to me, can't see a bonding gutter, just membrane. The rear of your chimney needs clearing and are they your broken slates lying there. Also left side of your chimney looks like theres no lead flashing and a load of cement put there, terrible mess, did they do that?