Search results

My oil Boiler is in the adjoined Garage at gable end of house. Its a 1 and half story detached house. The indirect /vented HWC is on upstairs floor in airing Cupboard. The garage is corrugated box section steel roof which I will be replacing in the spring. The pipes for the HWC run from the...

I Have a 2012 Mondeo 2.0 Titanium TDCI BA7 Estate. It the Duratorq engine. Just wondering if a new EGR is fitted, does the ECU have to be set up for the new unit. If so, is there a way of doing this without a scanner. I know that when I fitted a new battery it was fog light switch 5 times and...

I wish to replace the old GGL 606 ( early 90's Vintage ) velux windows in our bedroom. They are fitted to the 45 degree pitch roof with Marley Ludlow interlocking Tiles. I want to fit Polyurethane coated SK06 units that are triple glazed for Rain noise reduction. Contemplating doing this myself...

Thanks all for the comments and advice. Didn't realise the take off was a good bit higher, and after 25 years I guess 1/2 inch isn't that much. The tank is still sound. Its actually fitted into a breeze clock surround with a concrete base and no sight or smell of any leaks. I think I'll plan to...

I've Oil central heating. My tank is a plastic 1200 ltr ( semi circular type . Titan I think ) feeding a Firebird Popular 90 in the Garage The tanks the same age as the house I guess. 25 years. I have not been getting any problems at all, but just took an inclination last week to buy some water...

Yep, Perfect sense ( I think ) The wires coming from the Face plate are what's feeding all the extensions. They are only fed when the face plates plugged in Thanks again

Just a bit confused. if the blue white - white blue from terminal block are feeding the face plate, what's feeding the terminal block ? shouldn't these to wires come from the Master socket ?

Hi again, Thanks for the links and advice. I'll probably be ordering the item from Run-it-direct which replaces both just in case. I have a cheapo punch down tool as I've just run data cable from my router to dining room tv, and some spare cat 5e. Your last comment "something odd " has spurred...

Hi Thanks I am sure we are on a FTTC connection although a good distance from the cabinet. I have Talktalk Fibre Broad band 35mbs. Max poss speed from cabinet is 20.5mbs and I get 15-17. ADSL or VDSL face plate required or does it make no difference??? Also, with these face plates is it possible...

Wonder If I can get some help. This is my master socket sited on a coat, shoe cupboard ( right under Consumer unit ) as we enter the house. When we bought the house there was a Tel Extension socket in a good few rooms. These have been blanked off as we decorated the house. As you can see on one...

All, Thanks for the Input. I don't intend to put it in the same conduit as T&E. And to answer the comment about small cupboard, its actually quite a large space, but the only place I can get a cable through from under the floor and fish it out on the next floor up is where the T&E is routed...

Thanks for reply. Problem is that they will have to be right beside each other just for the vertical run in the cupboard. The 2.5mm T&E is in plastic conduit for the run up the cupboard but dunno if this makes any difference

Not sure if I should be posting in Computing forum or here. I have to run a Cat5e data cable from my router to Dinning room extension. Part of the run would be through a pantry cupboard from floor through ceiling ( about 2.4m height ) alongside a 2.5mm T&E Radial that only feeds the upstairs...

Bit Confused now with "nail down from the top " Don't they clip onto the side channel of the Tile and knock into the 25mm face of the 50 x 25 Batten underneath the tile

Don't they knock into the side of the tile supporting Batten ?

Thankyou kindly. On order whilst they are only a tenner, Maybe tackle this next summer though

Hello again Makie sorry for long delay in sending Photos. Away from home due to work. Heres a couple of photos

Hello Makie Can you expand a bit further . Do you mean nail one row and clip the next ??. What type of clips and do they have to be tile type specific ??

Just finished capping over my Facia's on the front and back of the house. Still have around the rear extension to do at some later date. The house is a 30 year old Timber framed house with Marley interlocking concrete tiles fitted over under sarking felt. The whole roof has OSB fitted over the...

Hoping I can get some advice I have to remove this bottom dry verge tile to replace the wood ( or cap over ) behind it. I know that when installing these they are started from the bottom and interlock upwards. Its a Marley type from approx 30 years ago ( that's the age of the house anyway ) In...