Search results

  1. johnny2007

    Interpretation of a number plate

    Wife was hit by a sleeping driver, exchanged details via driving licence and showed email with his insurance. Called our insurance and that number plate shows as not insured. Called his insurance and they initially said he was not their customer. After half a dozen calls and being thrown the...
  2. johnny2007

    The infamous "FOR"+ manufacturer + part

    I am more and more often coming across parts for bikes and cars, bearing the word "for" in the description alongside "genuine" or "original". All pictures and descriptions are taken from the manufacturer website, so one would wrongly assume they're buying a genuine product. No, you're buying a...
  3. johnny2007

    A3 rear calipers and hose replacement

    Hi everyone, I am about to attack this task on Saturday because both calipers are totally seized and I got new ones cheap from GSF (£30 Febi). Done this before on other cars, but this is well rusty, anything in particular I should make sure I do? I'm a bit concerned about the hoses bolt that...
  4. johnny2007

    Float valve? Help please

    Hi, my friend reported a leak coming from her loft, went up there (don't know how as she's very frail) and found a leak but doesn't remember where from. She tied that piece of string to the float and the leak slowed down. She took this picture. I called all 4 plumbers I know and they can't get...
  5. johnny2007

    Another eBay scammer

    Sent a £8 car spark plug, sealed, unopened with manufacturer security seal, all pictured in the ad. This scammer received it on Friday and today, around 5pm he contacts me saying that the pack was open and the plug used. He sent a picture of the pack with oil on it when mine was crystal clean...
  6. johnny2007

    I told you!

    Today, outside Richmond station. Face recognition for what??? The sleepy cops in large numbers there couldn't answer this question in any understandable language. This is another step towards full control from your beloved politicians. Digital ID anyone? I told you!
  7. johnny2007

    Highway Man sitting room...

    Following on from this: Please post all fashion, beauty, marital, relationship and all else you can think here. @Highway Man will reply to your questions and curiosity with his immense wisdom... You can thank me later @Highway Man :ROFLMAO: P.S.: @pete01 has already been reported.
  8. johnny2007

    External speedo MOT

    Question for @Mottie @carmanmemoranda and other knowledgeable in the field. My car's Speedo only works with the radio off. My question is: if I hardwire an external Speedo and stick it on the dash, will it be ok to leave it for MOT or would I need to remove it. Also, I'm thinking that one day...
  9. johnny2007

    Caliper mounting thread repair advice

    Hi everyone, I was going to change pads on my focus 2004 and when I unbolted the bottom guide pin of the caliper it felt like it was loose. Once the caliper was out of the way I tried the bolt and in fact, it just turned around endlessly. It's the actual mounting hole that's stripped, the bolt...
  10. johnny2007

    Advice for neighbour's new boiler

    Hi, my neighbour's boiler is on its last leg. In the process of being repaired but 2 plumbers said better be prepared for more trouble. It's a small flat, 1 bedroom, living room, micro kitchen and bathroom. Total of 4 radiators ATM (none in kitchen but one in hallway). He's running a Worcester...
  11. johnny2007

    Isolate Worcester bosh boiler leaking

    Hi everyone, my neighbour has a leak from his boiler and can't find a plumber to attend today. Is there any way to isolate the water to the boiler but not to the rest of the house? It's a Worcester Bosch 24i junior. Here's a video. https://photos.app.goo.gl/bNWuL2oy6sNdYxEc8
  12. johnny2007

    Anyone knows how to re-tap carbon fibre?

    I put this in the general diy section, if it's wrong please let me know. I inherited a carbon fibre bike stem with 2 bolt fixings. One of them at one point has been overtightened and the bolt doesn't grip anymore. If it was metal I would simply re-tap one size larger, but what can it be done...
  13. johnny2007

    Focus 2004 jumping

    Hi everyone, my old focus 2004 has a problem that is becoming more and more frequent. Sometimes when I let the gas go and let the car slow down without breaking, the car starts jumping/coughing, but it goes all perfect again if I accelerate. Never had any problem with idle either. What is it...
  14. johnny2007

    Paving pointing Sika All Weather fail?

    Time to repoint my patio and done it last week with Sika All Weather. Followed instructions to the letter and was impressed with ease of this product compared with hard labour of using sand and cement mix. However, after a week, i can still scrape off material with my fingernails. Is this...
  15. johnny2007

    Our beloved Sir Sadiq Khan...

    I now understand why certain "people" love him...
  16. johnny2007

    Hob connection check

    Hi everyone, My neighbour got her new hob connected by currys. The hob came with a plug but there was no socket behind the hob, just a blank plate with screw connectors, the ones that come in a strip. The installer cut the plug and used Wago 221 to connect the hob and enclosed them in the back...
  17. johnny2007

    More inhibitor?

    Quick question: 2 year old combi boiler working perfectly. On installation inhibitor was put in the system. Last year, at first service, engineer added inhibitor. This year, same engineer said it didn't need it although he didn't test the water but he noted that boiler never needed top-up in...
  18. johnny2007

    Would you pass theory driving test today? Try.

    I tried this and passed. Only 3 mistakes and done in 15 minutes. https://www.safedrivingforlife.info/free-practice-tests/practice-theory-test-for-car-drivers-1-of-2/
  19. johnny2007

    4 Tyres please. HOW MUCH???

    Just passed from my local tyre shop for a slow puncture. A proud Tesla owner paid £1400 for 4 new tyres... £1400 o_Oo_Oo_Oo_Oo_Oo_O
  20. johnny2007

    Treat rust on subframe

    Recently put through mot my runaround Focus and examiner said there's some rust on subframe that I better treat before it becomes a problem. My plan is to use a wire brush to remove flaky paint/rust and then use a rust converter product. Any recommendations about a particular brand?
Back
Top