Search results

I happen to have photos of when the roof was being retiled

When I checked the roof the felt ends just on top of the gutter as it should be. If I remove the last row of tiles would I be able to see inside the cavity? Also, what’s the purpose of the fascia?

We can see some dampness on the internal wall around the window, the paint has started peeling off around the metal bead; do you see anything wrong? When it rains there is the annoying drop hitting the windowcill, here’s a video showing where it’s coming from (and me trying to find a way to sleep)

I tried grinding but I found I was just exposing the bitumen from the tile adhesive I’ll just float the floor; I was able to return the wood adhesive and get some underlay I couldn’t justify the cost of self levelling compound for something that is already flat

That’s probably because it takes the same amount of time than grinding and the customer pays for the screed plus a premium for sourcing the material That is, if the floor is level

Wouldn't a light grinding be quicker? I've checked for level and it's within the floor specification

And will the screed adhere to a non clean substrate?

Why do I need the self levelling? It's quite flat already

Thanks, so they connect it to the non-rcd side on the CU. Isn’t another reason that if the load on one rcd side circuit is less than the current pv production (and excess going into a battery), then all current flows from inverter to said circuit, without going through any rcd? Is this even...

Hi all, I've had quite a few solar panels quotes from different solar companies and I realise I have asked questions that they might not have been able to answer correctly as they were the salesmen and not the electricians doing the work. I think one of them said they will connect the inverter...

I have a concrete floor that used to have tiles; the tiles have been removed prior to plastering so the concrete is ‘stained’ with plaster; there are also some paint residues due to me spraying some doors in this room Do I need to clean it before glueing the wood floor to it? What’s the best way?

I normally use only water based primers and paints; I have some preprimed doors (not sure what primer they used) which I had to trim so I needed to prime the sides; having run out of wood primer I bought this Leyland Wood Primer from SF...

I don’t feel anything at the valve Boiler pressure is around 1.5bar This is what I replied to the vendor Hello, Thanks for your quick reply. I don’t think it’s normal to have such loud noises and the cause can’t be the high temperature as it’s already running at 40° flow temperature. The...

It behaves exactly the same without the TRV head

I’ll try as soon as I get home; are you thinking about cavitation?

It’s this radiator https://www.traderadiators.com/trade-direct-aphex-aluminium-designer-radiator-white-1600mm-x-372mm-smooth

I think it comes from the radiator body; I can also make it do that by applying some pressure on it by hand The company I bought if from replied I've listened to the video, it is simply the sound of the metal expanding/ contracting. This isn't a product fault and is common with aluminium...

I purchased this radiator about a year ago; it has always made some creaky sounds while heating (I assume it's due to metal expansion and different metal parts rubbing together); while this was acceptable initially, the noise has recently become 10 times louder such that we can hear it while...

The gap is 10mm, I can probably cut something down on the table saw

After having the living room plastered I added some timber strips (4mm thick) to make the frame flush with the new plaster As a consequence I also fitted the hinges 4mm further away from the stopper; the door was already not touching the stop all the way around so now there is about a 10mm gap...