Search results

A single large sheet of Foamex (2m x 1.6m) so needs to be a handheld tool

5mm Foamex sheet .... so PVC face and foamed core .... not hard material What is a 'snide Dremel' is that a particular model ?

Task to drill 400 holes. about 100 of them are 0.03" (~0.75mm) and another 100 are 0.04" (~1.0mm) My DeWalt cordless is a bit heavy to use for this task, and will not close down on 1-.0mm or lower. I thought to use a pin chuck .... tried 2 from Amazon, but they simply don't run true (they were...

I got hold of an old Stanley 9-1/2 (1960's era) Base was true, blade needed sharpening & honing, and it now works a treat.

Only issue is after not a huge amount of use the rubber cover on shadow line on/off button has split. Not sure if I can get a spare.

I’m looking for a 2 part male & female locating pins. Have a 32mm panel that is sliding into a recess, and need some form of guide pins, that will locate into receivers. Found these … anybody know of anything better. I suppose if there was a slight taper or chamfer on leading edge of pin it...

Thanks … will help my search

Is this Stanley a Low Angle plane? Anybody have one can tell by picture (on sale locally)

I’ll look for 2nd hand No.70-1/2 thanks

Time to treat myself to a Low Angle block plan. I have seen plenty of new ‘Faithfull 6012’ models around £23 price point, which is pretty cheap are they any good ? or perhaps a RIDER NO. 60 1/2. But more than twice that price. either of these better ? Also see plenty of used Stanley’s 110’s but...

I have IP65 boxes in the roof so could mount boxes above ceiling, but need LEDs that will be hPoy with high level if humidity when Hot Tub in use.

I added the shadow line - already wired for it, so just a few screws.

I have a wood T&G ceiling (3.3m x 3.3m) on outdoor structure. With a void in the middle of 1.5 x 2.0m Currently no lights, I had liked the idea someone posted here of a ‘starry sky’ effect using fibre optics. However, getting close to £800 to put that in place...

I have a De Walt DW718 305mm compound mitre saw. Just in front of the operating trigger / handle is a black dial .... numbered 1-5 Anybody know what that is for Not mentioned in the user manual.

I have one of those for panel pins, nut suitable for 16G x 50mm nails

I have some very old nail punches. Instead of a flat face, they have a half round ‘dimple, to allow them to fit on the head of a nail better. Are these still available, and if so do they have a particular name ?

I like the concept, gives all benefits of a pellet smoker/grill without running costs of pellets. Any charcoal goes in, lump wood, briquettes. it gets up to temp in less than 10mins, digital control keeps set temp spot on, up to 4 meat probes gives you detail of how cooks are going, can all be...

Grill, griddle, smoker ... https://www.masterbuilt.com/products/gravity-series-800-digital-charcoal-griddle-grill-smoker

OK ..I have a small tin of white ceramic grace grease from when I changed disc brakes on my car ...I'll use that then.

Going to be assembling a new gravity smoker. (Think auto feed charcoal BBQ) Been suggested to use anti-seize compound on the various screws & bolts. They are typically M4 Steel black painted machine screws. Any suggestions for an anti-seize paste /thread dip.