Search results

The manual says 'The provided tool holder adaptor and the related fixing parts enable the product working with popular brand accessories which cannot be attached to the quick changing tool holder of this product.'

I’ve got a MacAllister multi-tool from Screwfix but not sure about whether a certain blade fitting is compatible with it. The circle bits are adaptors it has come with along with the black blade that has also come with it. I’m looking to buy the Saxton one but it looks a little different does...

I’ve bought a 1500x700 bath & need to buy the waste for it separately. What size do I need to buy it says Ø52 in the picture but just want to make sure before I buy one?

I’m looking to replace this shower tray for a bath with the front of it facing the right side of the picture. What do I need so the bath waste goes into where the shower trays waste currently is now?

Sorry I meant in the middle on the edge of the tray not the middle like the one you have linked. Also it's for a rental property so not looking for anything too expensive.

So I'm looking to replace my current shower tray as it has cracked. It is one of those long rectangular low profile trays as the ceiling is sloped so not too much height to work with & is in a downstairs bathroom & I believe it is a concrete base. I'm just looking for some advice as to any...

This is the screw that I was going to use with the washers, would they be ok or not & should I use the washers with it or just on it’s own?

I've got some round head screws which are pretty much the same size can I use these with the washers supplied to attach the bracket to the ceiling? Or without the washers which would you suggest?

No the fan will not be going just on plasterboard I've added a timber that is attached to the joist which it will go onto.

I’ve got to put up a B&Q ceiling fan which obviously came supplied with these cheap pan head screws. I’ve used the correct Phillips bit & no matter how careful you are the heads will strip out. So can anyone recommend me any other screws I can use instead of these? It says they are ø5 x 50mm &...

Yes this is the fan https://www.diy.com/departments/colours-lari-traditional-white-ceiling-fan-light/1876427_BQ.prd

Putting up a ceiling fan & I obviously have live earth & neutral to put my wires into which I know the black wire goes into the neutral which has a blue coming out the other side the earth obviously into the earth but the live which is my red wire the other side has a brown & red wire coming out...

I need to board this ceiling, there’s a fan going onto that timber so my plan is add a timber each side of that to screw new board to. Do I have to screw the timber to joists or just put it on with the drywall screws to board?

Managed to get it out with some vise grips.

I can’t get it out or tighten it in no bit fits.

I can’t seem to get a grip on the screw with the pliers.

I’m hanging a ceiling fan & have put the bracket on with the two screws. One of them is almost screwed in fully but has stripped before I could how can I tighten the rest of this up it was quite tight as I was screwing hence the reason it stripped.

Is it an issue if I just screwed it in the timber & left it with part of the screw coming out the other end of the timber?

The screw I have in the pic when screwed into the timber piece fully a part of it comes out the other side of the timber is it ok to leave it like that?

I’m installing a ceiling fan & have got this screw to attach the bracket to the ceiling. The screw is a little too long can I cut it down but then the point at the end will also be cut off does that matter? I did look at just getting some new screws but can only find ones that are threaded all...