Search results

OK point taken. I will try to look further into this tomorrow. Thanks for the help.

On the terminals that connect the cable wires to the bulb-holder. Sound OK?

A bit confused by the problems re the fitting of an exterior bulkhead light. It is this model – a basic polycarbonate item replacing an old Appleby metal version which appears to have stop working recently (maybe through corrosion?) Anyway it has been quite difficult to fit as it the system of...

Would it not be easier to submit your returns online?

You should have tried this, John. :)

κουμπί! :D

Just a decent family guy, Nige, nothing more.:rolleyes:

Amazing!! A panel of high skilled & experienced guys tell you what to do & you question their judgement??!! Sort of defeats the purpose of posing a question on a forum like this, or is it just me? Well I certainly did not want to give the impression of questioning anyone's judgement. As it...

Thanks, Joe. I''ll seek out some acrylic.

I need to paint this replacement piece of scotia moulding for a bathroom. Does it require a primer coat, undercoat or both? I suspect that just using a coat of eggshell is not sufficient. Thanks for any advice.

Sorry for such a long delay in replying but thought I should let you know how I finally drained the cylinder: I siphoned it! :D

Via hose to downstairs bathroom.

That's not so easy as where the cylinder is located is the lowest point of the attic. Pumping would be the best option here.

I need to replace a HW cylinder in an attic where there is no drainpipe outlet. In order to remove the existing cylinder I need to drain the contents. Could anyone recommend a decent wet & dry vax ‘type’ pump that would be suitable for this task, please?

Thanks, guys. Very helpful.

Anyone able to identify what size bulb-holder that requires replacement? The alabaster lamp of which it is a part originally came from Spain a two or three decades ago. Thanks in advance for any help offered. :)

Any reason for posting a link is more than 18 months old, Pip? Notwithstanding, Hanningfield, is just another venal, snout-in-the-trough opportunist who should have been entirely stripped of his peerage prior to being banged-up. It would appear he is standing outside his white 'austerity'...

Anybody able to advise what might be the best product to cover this staining which has now properly dried out. I know there is something called StopStain and also Zinssers. Any advice much appreciated.

Thanks, HD. Looks like you are bang on there. Gratters. :)

Anybody able to put a manufacturer to this flush-valve, please? The accompanying fill-valve is a Fluidmaster but despite a brief web-browse I cannot see one quite like this. Thanks for any help.