Search results

Purchase a service kit for your existing valve

15 is ok

Yes drain heating

You could let you bath into the wall a bit,or get one of the L shaped bath seals you fit before tiling

No need for a plug if screwing into the wood

Should of said By-pass

If your boiler is 240 v switching a link from live to 4 then switch live from 5 to boiler ,

Have you any pass fitted ,could be lack of minimum flow

Correct ,sits in last position ,it may have gone to H as the hot water was up to temperature , mid position if both heating and hot water calling

It’s not uncommon,check thoroughly around your rad valves as it’s a minor leak.

Manually move the brass base spindle to match the position of the valve

On the end of the 3 way brass section , probably removed as it’s faulty

No,the floor should be sealed and a drain if a wet room

Also check the brass base valve turns easily

When you have the stat removed of its back plate ( probably 240 v) is it still firing the boiler ,if no probably the stat if yes probably a zone valve issue assuming it’s only just started happening

They have none return built in

Have you considered secondary glazing

Has your boiler a built in clock ? If so it need leaving to permanent on .

The black plastic bit 1/3 of the way down on the left.

Filter in return clear ?