Search results

Is it possible to have two bell pushes wired to one doorbell (standard low voltage hard wired style)

I’m getting chattering from non return valves on my heating system when the zone ports or partially open (vaillant weather compensation controlled) Are non return valves essential in this instance or can I remove them? for clarity each zone is piped with flow and return to a bespoke 28mm...

thanks hadn’t thought of that

The pressure washer pump does not activate when the trigger is pressed any longer. This was repaired under warranty previously however this has now lapsed. can anyone advise what part is likely to require replacing please? thank you

I’m missing quite a bit of data in my sensoAPP for instance zone 2 flow temperature (zone 1 is present) then nothing at all for zone 3… mom able to control the zones as expected though I’ve tried reinstalling the app to no avail and rebooting the gateway the app is total carp!

Mainly because the keypad is ugly I think

I haven't yet installed as it might not meet the brief per se so will have to report back on that once the expansion unit arrives

Thanks that's what I remember from the Sapphire model too but they're telling me it's from the 230v side of things, I can't see how that's possible though?

Is there a way to wire in a normal style light switch for each zone to manually override the lights controlled by a GJD dygizone? The helpline says yes but having a quick look it wouldn't be possible to install a strapper between the unit and the switch so I'm at a loss how this would work?

Thanks all and sorry for the slow reply, I've had a change of plan and have a question about GJD dygizone. I'd like to hide the control panel element in a cupboard and have the override switches around the house for the respective zones. Can anyone advise how these are connected in? I believe...

I think your advice is sound and I really appreciate your help. I will be calling them tomorrow for some help as I can’t risk connecting voltage directly to them ( the inside of the controller has much more than just a switching power supply ) thanks again

Sorry no as in, in excess of 999mohms

Sorry for the slow reply my meter isn’t registering any resistance across the connections to the glass at all

We did our own after the same experience you’re describing. we invited the klargester rep around for advice who suggested the location and model of unit, we applied for building regs ourselves, hired a digger, arranged concrete and laid all our own ducts and pipes as per the manufacturer...

The obvious question and sorry if it's been answered is, are there external temperature influences that could be causing the setpoint to be reached, for instance, is the thermostat above / in close proximity to another source of heat (TV, monitor, plug in transformer, etc) ?

Thanks again for your help! The unit doesn’t appear to have got wet and isn’t immediately in the area where the damp patch on the wall is, but it is between the units location and the glass panels. here’s some pics of the unit:

Thanks for the information, I'd also found this which refers to the supplies being able to power 7m2 of glass (which is less than the installed area in question, though it's worked for several years). I can't see a dead shot on the outgoing wiring to the glass, but I don't know what the...

Does anyone know how to diagnose a fault on a dream glass dg-12 controller? Seems to be dead. Fast blow fuse had failed replaced and still nothing. No obvious caps failed inside. not sure where a replacement unit can be obtained as the company doesn’t seem to have a presence in the uk

The pirs are standalone steinel sensors and all outdoor lights are to be controlled in tandem

Watching flameports useful videos on pir and override switches I wondered if it’s possible to have multiple pirs and multiple override switches? the scenario is a long house with outdoor lights on the permittee controlled by pirs and the requirement for an override switch at either end of the...