Search results

Just buy one of these (or similar): Netgear GS308 Ethernet Switch Then put the ethernet csble 'through' it, any 2 ports will work. When unpowered there wont be a connection between the two cables, when powered there will. Put the AC power for the GS308 through your favourite timer switch...

You could buy a cheap Ethernet switch and plug the cable through this and then put the ac adaptor for the switch on a timer.

As a general rule of thumb, with the fan on, hold a piece of toilet roll to the inside vent, does the suction of the fan keep the toilet roll stuck to the vent? If so then the fan is likely sucking enough air in from the bathroom. However, as you have dust buildup on the external vent one could...

Not really. You could try using a non-contact voltage detector pen, not sure how well it would work detecting low voltage DC though… disconnect both cables at the LNB, at the TV end put a 9v battery across the core and shield and then use the voltage detector pen to see if you get a positive...

you could put them in the new radiator when fitting it, pour in before fitting the bleed valve. This kit will help

Gotta love the earth bonding! a) Bonded to a copper pipe, tick! b) Copper pipe through plastic pushfit, ahhh dont worry about it!

You cant disconnect the flexi at the top (after the isolator), the only way to take them off is to do so by loosening the bottom nut. You would need to turn off your water (hot & cold) then drain the system at the tap here, then remove. You can purchase end stops (such as these (if your pipe is...

Hard to tell from the photo, could it be that you drilled through plasterbaord into dot-and-dab then into breeze block? Was the effort required during drilling constant all the way? In my experience dot and dab is hard as nails but breeze block is nice and soft. Also could try tapping the wall...

Filler. This guide will help point you in the right direction.

Already been discussed previously

This made a huge difference for me, i was having the same kind of problems. I also changed my fan to an iCON 15 with additional run on module which works well

I'm not sure how you are expecting anyone on here to diagose the issue without being able to look at it. If you have paid someone to carry out the work and there is an issue it is not unreasonable to call them back to come and diagnoise the issue and repair (at no cost) if they are at fault or...

Are there any OEM part numbers on the underside of the parts? Really you need to identify if it’s for a R53,F56 series etc.

https://www.wickes.co.uk/Wickes-Multi-Purpose-Tarpaulin---1-8-X-2-4m/p/236339?utm_source=google&utm_medium=cpc&utm_campaign=PMAX%20Shopping%7C%7CBuilding%20Accessories&gad_source=1&gad_campaignid=21020493980&gbraid=0AAAAADs4IsbtMiYGKyzZlgeIJKjilxY55&gclid=Cj0KCQjwwsrFBhD6ARIsAPnUFD2hx_5nev9noRMTs...

Share some photos of the tap at the bottom off the cylinder.

yep, blow over it with a rattle can, the pre/post performance delta will be unnoticeable to the user. In real terms at Ku band (Commercial satellite tv) you may see a drop of 0.2db. Rain fade will affect the signal more than this

My old company manufactures satellite dishes from carbon fibre. We would spray the dish with electrodag (to improve rf performance) then add a final coat over the top in whatever RAL code the customer wanted.

I’m also looking to do the same. What BTW model are you looking at?

https://www.screwfix.com/p/titan-ttb774vac-1300w-16ltr-wet-dry-vacuum-220-240v/826kh Screwfix item # 826KH

I use an 'outdoor' hover for my grass, something like this: Wet-Dry Vacum (Titan)