Search results

Can anyone tell me what hose I need to be able to connect to the vent of the heat exchanger to bleed the air . Will a garden hose fit this vent? Or do I need a smaller size. I only need a couple of metres. Should have been left but previous owner must have taken it. Pete

We are thinking of having a new composite door supplied and fitted by Value doors. We don’t have any knowledge of the types of construction and what we should expect and lookout for except to say this door has a wooden infill. Any thoughts or suggestions would be very welcome and much appreciated.

The lid on our Flomasta magnetic filter must have a very small crack as there is now water on the lid. Reading other people experience of this filter also having the same problem. So, I would like to remove it and replace it with a different filter but there is very little room to make any...

Can I ask, where can I buy the spanner? I’ve had a google for one and was hoping to pick one up locally pete

Morning, the electric gates we have inherited when we moved in to our home are only opened and closed via the fobs. This works fine if we are at home for us but friends need to phone our mobiles so we can open up and that’s only good if we are at home. Been told that a SIM card can be added...

We have just moved home and I would like some help to identify the garage door opener. I’ve had a good look but can’t see any information. Now hopefully someone will be able to offer some info.

Good evening, We have just moved and the house has two controllers for the heating system. The boiler is a Worcester Bosch Greenstar 30CDI. - Old but appears in good order with service history. The controllers / Program are: Drayton lifestyle and a Salus RT500 If possible I would like to have a...

We need a new external back door. Had a look on line and had a read about GRP doors and would welcome the views on what to look for and what to avoid. Any recommendations would be appreciated . peter

I will need to cut a trap in already fitted laminate flooring. Can I ask what circular saw blade should I use. Will only be doing this once so I like to keep the blade cost to a minimum if possible. Thanks, Pete

Deleted

The roof on the Marley garage is asbestos and needs to be replaced. Is there a roof system that I can order that replaces these old asbestos roof sheets? Any info would be much appreciated Pete

We have the above hover. 10 months in and the brush head failed. It’s belt driven and when I had a look, the gears bearing was worn meaning it got hot and made a horrible noise. Call to VAX, and a new head sent free. I said the hover was not being used incorrectly and it appeared that this...

I’m looking for a small floodlight recommendation. Needs to be ip65 as it will live on a sidewall and be exposed to our weather. pete

Our machine trips the house breaker not the mcb. Have checked the plug and cable, both good. I read that most of this type of trip is the Interference capacitor or the heating element having an earth fault that trips the breaker. I will check the heating element but does anyone know if it's at...

Morning all. I'm looking for a replacement pan, white, fluted, low level, close coupled pan made by Doulton, to replace a damaged one. I've had a look on the internet but without any luck so far. Pete

We are looking at a bungalow built in 1997, south of England. Has solid, concrete floors and I would appreciate any information as to the flooring insulation regulations back then, if any! I'm wondering if this type of floor, back then, had to be insulated as a requirement of being a new build...

Please don't shoot the messenger .

small water leak from the pan connector, so I'm looking for recommendations please. I will stop using this toilet and as best, dry the area before before applying the recommend silicon . Any other tips are most welcome. Pete

I'm thinking of having Hive fitted and before I place the order, I'm trying to find out if hive could be fitted as the Switchmaster sm400 appears not to have "Hot water off". This I think is needed for hive to be able to control the hot water cylinder . Mine is a Y plan Profile boiler balanced...