Search results

i cant give you any i havent started the job yet. im thinking a swept bend tee will do the job!?!?!

Hi, Im going to be fitting a new ensuite on the third floor of a property, I need to run a new soil stack from the ground floor to the third, there is a discharge pipe running horizontally under the timber floor at ground level that I want to tee into. My concern is how I will be able to do this...

I have looked at the towel warmer again and its a 200 watt not a 400 watt and its not even gonna throw out more than 1 amp so I was wondering could I come off the lighting circuit with a fused spur? I know its not good practise but saves me spending a fortune with building control?? Just a thought

thanks for the replys

The circuit is rcd protected and I wanted to drill through the wall and mount the fcu on the wall next to the towel warmer.

Hi guys, im looking at installing a new towel warmer 400watts to a wc area consists of a wc and a basin. I want to spur off the kitchen socket the other side of the wall with a fused spur and some kind of timer device. Would this be acceptable or would it need an independant circuit also if the...

Hi Guys, Im thinking of buying a fluke 1652 mft but not sure if it will do everything I need it to for testing ie does it have a non trip loop impedance function, will it do insulation resistance at 500v and will it do rcd trip times etc? and whats the difference between the 1652, 1652B and...

yea is that normal though?

Hi, There a couple of our sockets that are sparking at the switch when you turn them off whilst using appliances ie, kettle, toaster etc I thought one of the sockets was faulty so replaced it with a new one and the new one was sparking also, the rcd at the consumer unit doesnt trip but I have...

Hi guys, Im a business that uses sub contractors, I want to take on a gas engineer full time but a lot of the gas engineers that are applying are qualified but not gas safe registered is there a way I can get registered with gas safe and have gas engineers working for me?

im guessing the total length is 10 metres

Hi if a soil stack is vented can I branch off it and have a secondary stack that has an air admitance valve for anew ensuite? im presuming I can but was more concerned on distances from the origional stack as it is a big property

Hi thanks, its flat cable which is clipped direct to the wall and behind the plaster.The cable run to the board is about 8 metres long.

Hi Can I run a 8.5kw shower on a 6mm cable?

what i meant was how much would a landscape gardener in the midlands be charging to supply and lay

hi ive got an area of 240sqm that needs turfing any ideas on what the going rate is per sqm in the midlands area including materials ie turf and topsoil?

Hi can anyone reccomend a timer switch for an immersion heater the origional economy 7 setup has burnt out and need to replace it with something more upto date.

the soil pipe would be on the front of the house and its a bungalow so would look poo!!

Hi we are looking at refurbing a bathroom and moving the toilet around etc. We need to dig the floor up to access the existing wastes for the toilet and then move it to the other side of the room, the pipework is cast iron downpipe on the outside so presuming it would be the same or clay...

Hi is there a flow restrictor in low kw electric showers because there is a 7,5kw shower which when it is turned to hot the water flow reduces but when its turned to cold has good pressure. Any ideas?