Search results

Yes i was going to cut into facia about an inch up from where the conservatory will meet. suppose my option is to go for the next size up ?

I am about to undertake a self build conservatory and have plastic facia on the back of the house where the conservatory will be. What size wilol i require when putting the lead from the house to the conservatory. I was thinking 150mm code 4 is sufficient or do i need to go bigger ?

I thought maybe the heater element. Is there anyway of working out which one it would be by fault diagnosis as i don't want to get the wrong part. If so a quick walkthrough appreciated. Plumber by trade so water not a problem. Electrics i need talking through a bit. Cheers

Hi can anyone tell me what the error code for 3 flashes then a pause is on this machine. I have searched the forum and have found different error codes but not my one. ( Trust me to be different!) Does anyone know how to go about fixing this. Any help appreciated.

Cheers all will give it ago.

quite a bit. Already tried scrubbing but no joy!!

Anyone know of a way to remove acrylic undercoat from block paving. Already tried a pressure washer but no good

Anyone know of a way to remove acrylic undercoat from block paving. Already tried a pressure washer but no good

Cheers for your help. Looks like if you are going to work on then you have to treat all water as mains and issolate hot and cold accordingly. Am i right in assuming that the f&e is for the thermal store cylinder only for the central heating, the same as if it was in the loft? If so do i...

Does anyone know how a boilermate II FE 200 works. Is it basically an unvented system with a small F&E tank on the top for hot feed only with all cold feeds run from mains? Help and advice greatly appreciated

One more question. The pipework to the bath taps obviously feed other taps in the house. if i use the hot and cold to the bath for the pump will this have any effect on the rest of the feeds?

AM i right in thinking that if i use a pump with the bypass loop i can use the plumbing for the pump which is already in place to feed the shower then tee off to the bath. If so is there any restrictions on where you should tee off after the pump? I would obviously cap off existing pipes to...

I am considering pumping the water for a bath The bath has a bath tap with shower attachment which in not very good. Two options. Just want to canvas opinion from plumbers for the best one. Currntly there is an ensuite with a shower which is pumped from the airing cupboard (which happens...

Full height will be available i will make sure of that as i actually fit bathrooms. Joists 400mm centres. I beleive the joist is about 4m long

Ok thanks.

Hi I have a bit of a problem with a notched joist in my bathroom. Whoever installed the previous bathroom kindly cut a nice chunk out of the joist. The joist is 6" x 1.5" and the notch cut out is 3" deep by 3.5" wide which was cut to install bath trap. I am about to install a jacuzzi...

Ok count that one out. Down to the immersion. If i put a fused spur on this can i come use? Seems a difference in opinion on previous replys. Also how do i know if there is capacity on this circuit? If i am unable to spur off this whats next? You guys must see this alot.

Ok that makes it a little clearer but always another question i am affraid. Can i used fused spurs off the spur for the valve and cylinder stat. Surely this would protect this circuit?

Bit confused now. Two more questions. Can i take it as said that i cant come off the spur that is feeding the three port valve and cylinder thermostat. If not why ? Second. I know the immersion is rarely used , however, this is most likely to be used in conjunction with the shower pump as...

:oops: Sorry immersion is run off seperate feed my mistake. The spur i want to come off feeds just for the central heating 3 port valve and cylinder thermostat so is currently in use but not taking the current of the immersion. Does this mean i can use this spur to feed my two pumps now or...