Search results

wow....Thanks very much for this. Much appreciated.

i had a crude fix in place now. Its just putting corrugated pipe back and apply some sealing. Difficulty was pipe was so weak it was disintegrating when tried to put it back to the joint, in that process it became too short. Somehow managed to put it in right place now:unsure:. Used pipe weld...

Mine is not multi fuel (at least installation I have) not sure if this model can be used for both fuel types..?

What I meant is corrugated pipe end is made as a normal pipe to join it to the waste pipe end as you can see in the photo. In that case reusing this pipe may not work.

Bath main waste pipe is not the problem, since I can't access other end of overflow pipe (without moving bath) I will not be able to completely replace it with a new overflow pipe.

Need to see if both are similar size. On first look corrugated pipe seems to be bigger and fitting directly to valve at bath may not work. Will check again and see. thanks

Yes I do have...But when I touched the pipe it is coming off easily. I suppose in this case its aged pipe dealing with hot water.. I will check this again:unsure: It is wall and not much space to put a new overflow pipe with out moving bath.

Managed to remove side panel , unfortunately tiles on the right also came off. leak is from the overflow pipe that joins back to the main outlet pipe. overflow plastic pipe more or less disintegrated and water from main exit valve leaks out though that . See photos.. Now for solution what sort...

May be time to test these ones..??

are you saying i need to remove silicone here both ends or the narrow tiles ? or both? see red lines in t he photos Removing silicone get the wood panel straight away ? or need move/prime thwm to top or bottom or sides..?

I prefer lawn tennis over petanque..:D

Its noticed in the morning that water is dipping from kitchen ceiling. after checks realised leak is from old bath (not metal bath) just above the kitchen. Physical inspection on bath doesn't show any cracks, now need to remove side wood to see any leak :(. I blocked use of that bath and no...

Is there a name for this model./style.? I can't see any manufacturer name any where..But I have another one which seems to be a replica of a well known brand's model

Ok. looks like I need fire bricks to both sides and back, which I believe will rest on the projected platform on 3 sides.. But that need to be taper to the edges due to slightly round shaped stove shell. Also need ash tray which will rest on the bottom to collect ash May be a a strong metal...

I have this wood burner in my study which is not being used after purchase and looks like only shell and seems to be missing some parts. I have another one in living room which got bricks, ash tray and mesh system to push ash down to tray. Not sure that is expected in all wood burners..?Or my...

I have this Mountfield M28M which will not start if I disconnect grass catcher (as design). But I want to connect my heavy lawn roller after removing catcher and run around my lawn. At the moment if I disconnect grass catcher my ride-on will not start! It looks like some sensor/safety mechanism...

Look inside the wall sockets, or even at the meter? Thats good lead..Thanks My metal detectors not giving 'a line of detection' but managed to get a sharper from underground!

Yes understood, you mean need to have strength under the grass to get bounce etc. I am sure I can't get Wimbledon level but hope if I try my best with my roller I can get this to bearable playing state matching the level of players using this court..Thanks

two reasons, one i am keen to find fro where the power is taken as that internal wiring point I can't detect. (thats why I was asking if there is a standard in these type of external connections..?) secondly ofcourse want to see if I can reuse as all wiring inside stable is intact.. Wire end...

My previous owner just cut wire that supplied power to my shed. Now I am struggling to find the wire. It is actually a stable block. Not sure from where the connection to stable coming..? I managed to find other end of wire which was cut, but not able to find where its connecting to as it...