Search results

Hello, I am wanting to replace my wireless HC60NG & CM61NG with a fixed wired in timer controll. I have a fused switch that goes to the controller and then to the Combi Boiler Can anyone tell me if the wiring will be different on a fixed unit and what are the best model options...

Mick I have exactly the same problem as you had with your mother in laws ISAR HE30. When you say ypou put a link in to bypass the timer what do you mean and how do I do it. Regards Paul

Hello, Is there anyone out there who can give me advice or a drawing (with dimensions) for building a dartboard easel. I could go out and buy one but I would prefer to have a go myself. Any advice or help appreciated. Regards Paul

Thanks for this, much better than the last one, clears the bathroom really quickly, and at £19.94 it's a snip. Regards Paul

Thanks for that, Screwfix only a couple of miles away. Will go tomorrow. Regards Paul

The old fan is a Marley DX100 T 100mm Fitted to gable end wall so approx 300mm ducting to vent I want a more powerful fan as I don't think this one was up to the job anyway before it gave up. Paul

Hello, I am needing to change my bathroom extractor fan and want to know whats the best one for my money. I have approx £50 to spend. The fan must be double insulated and have timer built in. No pull cord as switch outside of bathroom. Regards Paul

Hi, I am wanting to install a marble fireplace and I am wondering if I need a specific type of cement. The fireplace is a whiteish colour so it would need to match. Or can I just use any tile type cement. I will be installing a Balanced Flue fire with sealed glass front into the surround. A...

Hi, above is a drawing of the connections made at inside the unit. One of the earths, the black and the red come from the same cable but I cannot see where the other earth comes from. Could it be that there may be a snapped cable in the brickwork which runs to the switch ?[/img]

Hi, After moving into my current house some 18 months ago I have just got round to trying to find out why my outdoor PIR sensor light doesn't work. Outside at the electrical connection there is an earth, live and neutral all connected correctly. I thought it might be the circuit...

Hi thanks for the reply, M house is a modern 3 bed detached. The only pipes in the loft are for the DHW & DCW. There are no pipes going into the corners. My feeling is that the manifold is under the landing floor also. Thanks Paul

Hi, I have a leak somewhere in my CH system and need to know where to start. I have had my Combi boiler pressure tested and it holds its pressure so i know it is somewhere in the system. All of the rads have been checked for leaks at the valves and all are OK There are no damp patches...

OK, System pressurised to 1.5 bar at 10.30pm last night and ch flow and return isolated at valves. No domestic hot water used. Pressure this morning at 6.00am is 0.75 bar. Does this mean the boiler is NG and if so why am I not seeing any leaks inside the boiler. I have removed the cover and...

Hi Dave, thanks for the suggestion. I have tried this a couple of weeks ago but when using the domestic hot water the pressure in the boiler went up. It slowly came back down over time but with a wife and two kids it is very hard to stop them using the hot water meaning the pressure...

Hi, An update on continuous pressure loss problem. Have had an Ideal boiler engineer out who checked all the necessary areas for leaks, h/ex, expansion vessel, prv, condensator pipe etc and concluded the boiler is in perfect working order. I have also just had the boiler serviced last week...

Hi, The house is about 20 years old. I take it from the reply you also think the problem lies with a leak in the system pipework. My downstairs has stone tiles in all rooms except the living room which has wood flooring and would have to be a last resort to lift it. I have been informed...

Hi, thanks for the replies. I am not sure where the downstairs pipes run, whether they run in the concrete or in the walls. I have only been in the house just over a year. Is there an easy way of telling where they run ? The pressure relif valve isn't leaking, however there is a ver slow...

I had an Ideal Isar HE30 boiler fit nearly one year ago. About six weeks ago the system started to lose its pressure and would go to zero pressure over a 48 hour period. I topped up the system to 1.5 bar and bled all the rads. I checked all the rads and pipework in the loft for leaks with...