Search results

hi ive got the hp photosmart C4580 wireless printer it worked fine with windows vista but ive just updated to windows 7 and now its notws compatible... is there any update for the software so it can run on windows 7 or do i have to put windows vista back on.. it wont even let me install the set...

on a new build theres a 3 phase supply coming into the house... at the board and at the meter it reads: L1 244V L2 10V L3 244V theres also a 3 phase socket coming off the board, which has a transformer ran from it. but the reAdings from the terminals on the switch to the transformer...

hi my laptop is not booting correctly anyone know where i can download the start up disc for free anywhere as i need it to repair. thanks

ok so is there a pump i can put on to increase the pressure?

yes the cold water comes from the mains.... dont have the instructions but i have this if it helps... http://cgi.ebay.co.uk/MODERN-TALL-KITCHEN-SINK-PULL-OUT-MIXER-TAP-667-/120623496576?pt=UK_HomeGarden_Kitchen_SinksTaps_GL&hash=item1c15b87d80

it was a lot better then it is now, ive checked the isolator valves to make sure there fully open as well.

hi there, just put a new kitchen in and my hot water pressure is no good, it comes out like a dribble and takes about 5mins to fill the sink to wash pots. its a gravity fed system, im guessing its to do with the tap, its a pull out mixer shower head tap so it has more flex hose to go round. The...

great.. computer shop it is then. i need to get some stuff off my hard drive. any way off doing that? taking hard drive out and plugging it into pc??

no nothing, it just stays blank. the power light stays on and thats it, it dont even sound like its loading up either, just the initial boot up sound then you dont hear anything then......

i have a fujitsu siemens amilo li 2735 and its just stopped working on me... i left it on charge while i went out, came back to turn it on and the screen didnt turn on. The lights came on at the bottom but no screen. any ideas or suggestions??

ok wall units are up now thanks, my next issue my walls are not flat. ive got a 300 and a 1000 side by side and the 300 sticks out furthewr than the 1000 so got to pull it out at the bottom and screw them together level. now from the underside the 1000 unit is about 10mm off the wall, do i fill...

yes its was a 600 theres a 6oo bridging unit going above it..... ive got 910 from the floor to the top of worktop, what would the measurement be from top of worktop to underside of wall unit? gonna have to mark it all out first to see if it works out.. also what size plugs and screws would...

hi just had my new b & q kitchen delivered, ive built all the units up, now im stuck.. my problem is i have a 100mm duct hole in the wall where my extractor hood used to be, everything is going back to the design it was in the old kitchen, so i got to get it right so the extractor fits back...

thats exactly what i meant... thanks i shall get one and see if that stops the water getting in.

on my back door water seems to be coming in, theres a strip missing from the bottom of the external side of the door.... im guessing its where the water runs down and off it. all the pins are there for the strip to clip on to. anyone know where i can pick one up from??

hi basically doing the kitchen and wanting to take off the old paint off al the pipes and put new on.. whats the best/easiest way of getting the old off? thanks

how can i tell if my cable for my cooker is 6 or 4mm? it says nothing on the cable, each wire has 7 strands but from what i read 4 and 6 have :?

thats alright then my 6mm cable will be fine to run the oven and the hob on a 40a. thanks

the oven alone i could spur off a socket if the hob used too much of the cooker circuit..... any ideas how much power this ceramic hob uses?

yes thanks steve just finished reading up off google about the different types... only thought there was 2 types of electric hob! (solid plate and induction) turns out theres 4 / 5 types. i also noticed the difference in price as well! i would of prefered a gas one but not got a gas pipe in...