Search results

Hi boiler pressure drops more often now. I have done a leak test on the rads and they appear fine. When ch comes on the pressure guage shows normal to high. When switched off it drops low and sometimes to zero. This prevents ch comming on. It only takes a day or so before I have to top it up...

Hi, every mow and then my eco tech switches off. The error code states that it has no water and the water pressure guage reads zero. I simply turn on the water fill and fill it untill the guage reads about half full. The boiler then switches on and everything is fine. Its currently happens...

thanks. so where would be best?

My cylinder is directly under the cold water feed tank with no real elevation. Hot water pressure is low. Can I fit a pump anywhere that automatically switches on when a tap is openef? Also, the cylinder has about 40mm of foam stuck to it. Someone said it also needs a jacket. True??? Crakkers

Thanks bolt on top or hidden?

Hi Any advice on removal of light cluster? Will I need to remove body panels or trim? C.

I have now switched the rad dial back up and switched CH off at the programmer

There is a thermostat strapped to the cylinder with a dial setting knob on it too. Also I noticed that I have two dials on the boiler. One with a radiator icon the other a tap. If I turn the rad dial off everything goes cold regardless of the postion of the tap dial. The rad dial needs to be...

There is a thermostat strapped to the cylinder with a dial setting knob on it too. C

Hi I have a fairly new EcoTech plus boiler connected to a conventional CH and hot water system in that its not a combi but have a cylinder in the loft and the boiler heats the water via a coil in the cyclinder. In the winter when we have the CH on the hot water can be piping hot with the...

i am sure it does, as clearly stated!

so is the answer to my question "NO"?

WOW, difficult this. I dont really want to remove anything. Just wondering if a wireless reciever will replace the current tstat on the wall? Why does it need to go next to the valves? I have no airing cupboard. All motorised valves (only 1 i think) id above the boiler in the roof void. B

Any further help?

Thanks. Its a vaillant ecotec plus condensing biloer but not a combi, i still have a water cylinder with immersion, but the boiler does heat the hot water in the copper tank. i have a honeywell st6400c controller and a tstat that has towerstat rsd written on the front. How many...

I have a thermostat wired to the boiler. The Tstat is in the hall. I would like a wireless tstat. Is it possible to fit a wireless reciever where my existing tstat is in the hall that will wirelessly connect to a tstat taht i can move from room to room?

Hi What is best and why - TCT or Solid Carbide? Also which make. Doing a lot of routing so I do mean the best!

Hi, Just wondering if.................... the condensate in the drain pipe from my boiler freezes and the condensate backs up will this cause damage to the boiler. Should I be trying to thaw the drain pipe and ensure this can not happen?

hi I bought a chain door closer and have realised that because the door is a glass panel type the barrel of the closer is too long to fit. BUT, just had the thought of fitting it at the top or bottom of the door. Will it still work ie, close the door if fitted so far off the middle...

Hi Can anyone tell me the accurate wall thickness of 160mm soil pipe? Cheers