Search results

I need to move a hole for a toilet soil pipe on a rendered house. I plan on cutting a piece of breeze block and cementing it in place. Set back around 25-30mm from the face of the render. This there a way then to patch the render?

They decent, don't mind playing for the extra?

These

What would you do?

I have some bath taps to swap with some old hep2o tap connectors on am I best of putting new connections on when I swap the taps?

Are the bath wastes with the rubber that in an old in one top/bottom rubber ok? Also were would you add silicone to help the seal. Thanks

When using these should you cut the nozzle the same diameter of the profile of the smoothing tool your using

Had a slight issue when putting the handle back on the on/off cartridge at the top. If have its vertical it will stop the flow of water. But it will push about say 10degrees past vertical till the valve is at its furthers point. This would push the handle off square. I have tried taking the...

Forgot to attach, please see below

Does anyone have an idea how this cartridge will swap? I know I need to remove the rest of the face plate. I just wonder how it is likely secured on to the shower. Thank you.

Guess there is no easy way of checking the check valve? Just trying to avoid swapping the cartridge if it's not this.

That's the style of shower so they usually have check valves on the hot side? Or must likely the cartridge?

Thanks I'll try and ask the manufacturer if there is any check valve in the shower

Sorry I'm getting flow of water just no heat when turn it up on the temperature knob.

The dimmer switch is about 15 years old did they not used to work with led lights?

Thanks. I'm getting nothing at the moment.

So I would need a non led. Dimmable bulb? If thet make these.

Is this usually the cartridge on the temperature dial? Does it just stop letting hot water through? Thanks

Any idea why a dimmer switch is constantly giving flickering lights even though I have fit dimmerable bulbs. Have attached a photo thanks.

Thanks yes the captive ones with the oring do look cheap. The other type are machined so good they don't need the oring to seal?