Search results

Hi, I believe I have Y gravity fed central heating system in my house I had Honeywell evohome thermostat with few rad controllers =4 heating zones, and few rads not zoned- it does control my ch but for hot water I use Sunvic Sunpro 2000 2 Channel 7 Day 5/2 Day 24Hr Programmer so in the setting...

got transformer and loom replaced, all working, i feel loom got moisture and burst the fuse, I thing moist/ leak from cartridge caused it, however my hot water valve on inlet pipe overturns and I can not stop the water to replace the cartridge....

thanks this was my fear- I have blown transformer if nothing else so shall I get new transformer, and new loom? then if that works will replace cartridge

hello moved to a house, they had aqualisa aquastream, it was working fine until last night; stopped pumping this morning checked the fuse 3amp, was blown, put the new one in-again -blown, di put 15amp and nothing, fuse ok, but still not pumping Checked if any power comming to the unit from...

this looks interesting, no ifttt, but links to my heating , pricey though http://www.espares.co.uk/product/es1771414/honeywell-evohome-wireless-complete-home-alar?pageNumber=3&GrandChildCategoryId=1971&ManufacturerId=6

http://www.espares.co.uk/product/es1771414/honeywell-evohome-wireless-complete-home-alar?pageNumber=3&GrandChildCategoryId=1971&ManufacturerId=6

Hello thinking off getting smart home security alarm, but not sure which one should I go for?> I have external hikvision IP cameras around my house, wanted something not too expensive, maybe with IFTTT, would be nice if the system could be integrated with some of the smart devices I have...

Hello, Im planning to go ahead with my internal garage conversion have a few questions before I go ahead: 1. floor insulation: do I need to leave a air gap 25mm between DPM (plastic sheet) and celotex 50mm? ( timber around the inside of the wall to run joists off, and celotex in between...

lovely,,, Im in progress of planning conversion for my garage and have some quostions I would like to ask? wonder if someone could answer them: 1. did not you have to use channeling for socket wires? 2.did you have drawings for LA?

Hi after considering all option I decided to go for EVOHOME got Honeywell evohome Connected Base Pack so now I need to connect the Wireless relay box BDR91 ,however my current connection is Hortsman universal backplane and has only N, L, 1,2,3,4 connection The Wireless relay box BDR91...

anyone?

Hi All just moved home in to 3 bed house and I have Baxi System HE A boiler- heat only, systrem boiler there is CentaurPlus C21 programmer , and Honeywell Dial Setting Room Thermostat I want to have a wireless thermostat so I move it around the house At my previuos house i had...