Search results

I had the same problem though with a slightly faster drip, took apart the toilet and refitted loads of times (b****y awkward getting it in and out as well) but still a small amount of leaking from by the bolts. Got the screw fix kit and no leeks at all. The only bit of the kit that was...

Hi I'm thinking of doing this myself and was wondering if anyone had any tips? I'm just going to drain the system as I would for removing / installing a radiator then cut the return pipe to the boiler (identified from the manual) install and refill system. Is that right or would there be...

This might help (4th post) obviously you dont have to deal with the tanking issue. http://www.diynot.com/forums/viewtopic.php?t=147643

Thanks lads, I'm off to find my buckets.

Hi, I am looking to replace the bathroom radiator with a towel rail (I will only be doing the pipe work and capping it not installing the rail until I have tiled). Anyway I only have to drain off the top half of the system and the tight arse in me doesn't want to waste the 2 lots of inhibitor...

Thank you for the replies :lol:

Thank you for the replies, I don't know too much about tanking, I just prime the walls paint the stuff on then tile straight onto the wp1 once it's dried is that right? The tiles are about 30cm x 40cm x 1cm ceramic is the tanking alright with this much weight? Thanks a lot.

Hi, I think I'm going to take the old plaster in the room down and start again before I tile my bathroom. I was just wondering what would be the best stuff to use on the wall (I will have a bath with a shower fitted in one corner). I don't want to wait for ages for plaster to dry so was...

Hi, I have recently removed the tiles in my bathroom, only the bottom half of the wall was tiled and the top half was painted. Anyway after removing about 20 layers of paint from the wall I have discovered the plaster in the photo, it appears fairly cracked but doesn't really sound hollow...